IV-H2000MA Keyence Monochrome Vision Camera 300-2000mm

IV-H2000MA Keyence IV Series Long Range Vision Sensor

Key Technical Specifications

• Brand: Keyence
• Model: IV-H2000MA
• Series: IV Series
• Category: Integrated vision sensor camera, long range, monochrome type
• Installed distance: 300 to 2,000 mm
• Field of view: 45 x 33 mm at 300 mm; 300 x 225 mm at 2,000 mm
• Image sensor: 1/3 inch monochrome CMOS, 752 x 480 pixels
• Exposure time: 1/10 to 1/25,000 second
• Illumination: Infrared LED with pulse or DC lighting mode
• Detection tools: 16 tools, including shape detection, color area, edge pixels, pitch and diameter
• Programs: 32 switchable programs plus one position adjustment tool

Measurement Range, Resolution and Anti-Interference

• The long range optics keep a wide field of view for large parts and pallet checks.
• The 752 x 480 pixel sensor delivers stable resolution across the full 300 to 2,000 mm span.
• Auto focus adjustment speeds up setup when operators shift the mounting distance.
• The infrared LED lowers sensitivity to ambient visible light on the shop floor.
• Pulse and DC lighting modes further reduce interference from nearby light sources.
• Six inputs and four outputs give fast trigger and reject signaling to the controller.

Environmental Tolerance and Electrical Ratings

• Operating temperature range: 0 to +50°C with no freezing allowed.
• Relative humidity range: 35 to 85% RH with no condensation allowed.
• Protection rating: IP67, except when the polarized filter attachment is mounted.
• Vibration resistance: 10 to 55 Hz, 1.5 mm double amplitude, 2 hours per axis.
• Shock resistance: 500 m/s², three times in each of six directions.
• Supply voltage: 24 VDC +/-10% including ripple, with 0.6 A or less power draw.
• The main case uses aluminium die-casting, the front cover uses acrylic and the adapter uses POM.
• Weight is approximately 270 g, so the unit suits compact mounting brackets.

Communication and Control Features

• The M12 4-pin connector carries 100BASE-TX or 10BASE-T Ethernet traffic.
• Built-in protocols include FTP client, EtherNet/IP and PROFINET for factory networks.
• Six digital inputs (IN1 to IN6) and four digital outputs (OUT1 to OUT4) handle handshakes.
• Output rating reaches 26.4 V and 50 mA with N.O. or N.C. switching.
• There is no communication expansion slot, so the built-in ports serve all network needs.

Installation Guide

• Mount the sensor with the POM adapter and keep the front cover free of dust.
• Set the installed distance between 300 mm and 2,000 mm before you apply power.
• Connect a 24 VDC supply and confirm the ripple stays within the +/-10% limit.
• Attach the M12 4-pin Ethernet cable and route it away from motor drive cables.
• Run auto focus adjustment, then teach the detection tools for your target part.
• Store up to 32 programs so operators can switch products without reprogramming.

Packing List

• One Keyence IV-H2000MA vision sensor camera
• One mounting adapter
• One quick start guide

FAQ

• Q: What is the field of view at 300 mm and 2,000 mm?
  A: The view measures 45 x 33 mm at 300 mm and 300 x 225 mm at 2,000 mm.
• Q: Does this model use infrared or visible red light?
  A: It uses an infrared LED, which helps reduce ambient light interference.
• Q: Does the sensor support EtherNet/IP and PROFINET?
  A: Yes, both protocols are built in, along with FTP client communication.
• Q: How many detection tools and programs can I store?
  A: You get 16 detection tools, one position adjustment tool and 32 programs.
• Q: What is the protection rating and operating temperature?
  A: The rating is IP67, and the operating range is 0 to +50°C without freezing.
• Q: Is the unit new and in stock?
  A: Yes, we offer brand new original units and keep stock available for order.
• Q: How fast do you ship, and which carriers do you use?
  A: We ship within 5 days by DHL, UPS or FedEx.
• Q: What is your return policy?
  A: We accept returns within 30 days of delivery.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628