IV3-L6C Keyence AI Imaging Ring Light - IV3 Smart Camera LED Unit

IV3-L6C White LED Ring Light for Keyence IV3 Smart Camera

Key Technical Specifications

• Brand: Keyence
• Model: IV3-L6C
• Category: AI imaging illumination unit (ring light)
• Compatible sensor: IV3-600CA
• Illumination type: White LED
• Supply voltage: Power supplied by the connected sensor
• Operating temperature: 0 to +50°C (no freezing)
• Relative humidity: 35 to 85% RH (no condensation)
• Protection rating: IP67 (valid only when mounted to a compatible sensor; excludes use with polarizing filter OP-88644/OP-88645/OP-88646/OP-88647)
• Material: Case: aluminum die-casting; front cover: acrylic
• Weight: Approx. 195 g
• Built-in ports / protocols: None

Installation Guide

• Mount the IV3-L6C ring light onto the IV3-600CA sensor before powering the system.
• Confirm that the mounting surface is clean and that the ring light sits flush against the sensor front.
• Route the connection through the sensor interface; the sensor supplies all required power.
• Do not attach a polarizing filter if you need the full IP67 protection rating.
• Check the ambient temperature stays between 0 and +50°C during operation.
• Keep humidity within 35 to 85% RH and avoid condensation on the acrylic front cover.

Environmental Resistance and Reliability

• The IP67 rating protects against dust ingress and short water immersion when mounted correctly.
• The aluminum die-cast case resists mechanical shock in typical inspection cells.
• White LED output supports bright, consistent imaging for color and surface inspection.
• The unit operates reliably from 0 to +50°C without freezing conditions.

Packing List

• 1 × Keyence IV3-L6C white LED ring light
• 1 × Protective packaging
• Shipping via FedEx, UPS, or DHL

Shipping and Support

• We keep this item in stock and dispatch within 5 days.
• We ship with FedEx, UPS, and DHL for global delivery.
• We accept returns within 30 days of delivery.
• All units are brand new and original.

FAQ

• Q: Which sensor does the IV3-L6C work with?
  A: The IV3-L6C works with the IV3-600CA sensor from the Keyence IV3 Series.
• Q: Does the ring light need a separate power supply?
  A: No. The connected sensor supplies power, so no extra cable or adapter is needed.
• Q: What is the operating temperature range?
  A: The unit runs from 0 to +50°C with no freezing and stays within 35 to 85% RH.
• Q: Is the IP67 rating always active?
  A: The IP67 rating applies only when you mount the unit to a compatible sensor and do not use a polarizing filter.
• Q: How much does the unit weigh?
  A: The ring light weighs approximately 195 g.
• Q: Do you have this item in stock and how fast do you ship?
  A: Yes, we have stock and ship within 5 days via FedEx, UPS, or DHL.
• Q: What is your return policy?
  A: We support returns within 30 days.

© 2026 NexAuto Technology Limited. All rights reserved. Original Source: https://www.nex-auto.com/ Contact: sales@nex-auto.com Phone: +86 153 9242 9628