Relay Output Module IC694MDL916 - GE Fanuc Emerson

GE Fanuc IC694 MDL 916: 16-Channel Relay Output Module for PACSystem RX3i

Key Operational Capabilities

Channel Isolation & Design
16 individually isolated Form A (Normally Open) outputs prevent signal interference, ensuring stable operation across industrial environments. Each channel features dry contacts, allowing mixed AC/DC voltage configurations (per-channel customization).

Voltage & Current Specifications
AC Range: 5-250VAC (nominal 120-240VAC, 47-63Hz)
DC Range: 0-125VDC (nominal 5/24/125VDC)
Minimum Load: 10mA per point (supports low-power devices)
Maximum Load: 4A (resistive/general purpose) for 5-250VAC/5-30VDC
2A (pilot/lamp load) for 5-30VDC/5-250VAC
200mA (resistive) for 125VDC
Surge Capacity: 6.5A for 80ms (resistive loads)

Performance & Reliability
Switching Frequency: Max 20 cycles/min (optimized for intermittent tasks)
Response Time: 10ms (on/off) for rapid control feedback
Relay Life: 200,000-1,000,000 operations (varies by load: 200k at 4A resistive; 1M at 0.1A resistive)
Thermal Management: Auto-shutdown at 88°C, restarts at 78°C

Physical & Electrical Details
Dimensions: 128mm (H) x 98mm (W) x 68mm (D)
Weight: 200g