Sidebar

Kategorije

Istaknuti proizvodi

51305907-17551305907-175-1
Honeywell

MC-TAMR04 Honeywell niskonaponski analogni ulazni multiplekser

Pregled The Honeywell MC-TAMR04 je multiplexer niskonaponskih analognih ulaza dizajniran za efikasno upravljanje višestrukim analognih ulaznim signalima. Sa mogućnošću rukovanja do 16 ulaznih kanala, ovaj uređaj koristi releje čvrstog stanja kako bi obezbedio pouzdanu obradu signala. Tehničke specifikacije Proizvođač: Honeywell Broj proizvoda: MC-TAMR04 Tip:...
FCP280-1FCP280-2
Foxboro

Foxboro FCP280 RH924WA adapter za optičku mrežu

Tehničke specifikacije Specifikacija Detalji Zahtevi za napajanje Ulazni napon: 24 V DC (redundantno). Potrošnja energije Jedan modul sa redundantnim mrežnim adapterima: do 11 W.Otpornost na greške u paru sa redundantnim mrežnim adapterima: do 20 W. Fiber adapter RH924WA Minimalni ciklus obrade bloka (BPC) 50...
PROXPAC XL Senzor blizine 330880-16-40-037-03-02PROXPAC XL Senzor blizine 330880-16-40-037-03-02
Bently Nevada

PROXPAC XL Senzor blizine 330880-16-40-037-03-02

Bently Nevada PROXPAC XL Proximity Transducer Proizvođač: Bently Nevada Broj proizvoda: 330880-16-40-037-03-02 Tip proizvoda: PROXPAC XL Proximity Transducer Proizvedeno u: Sjedinjene Američke Države Dostupnost sertifikata: Moguće dodati Sertifikat porekla (COO) Opcije sonde i konfiguracije: Opcija sonde i odobrenja: 16 (3300 XL 8 mm sonda...
  • IC670ALG621 - Analog RTD Input Field Control ModuleIC670ALG621 - Analog RTD Input Field Control Module
    General Electric

    IC670ALG621 - Analog RTD Input Field Control Module

    GE Fanuc IC670ALG621 Analog RTD Input Field Control Module Model Full Name and Variants GE Fanuc IC670ALG621 - 4-Channel RTD Input Module Compatible with Genius Bus Interface Unit (BIU) Supports 3-wire and 4-wire RTD sensor connections Key Technical Specifications Input Channels: 4 independent RTD...
  • IC670CBL002 I/O Expansion Cable | GE FanucIC670CBL002 I/O Expansion Cable | GE Fanuc
    General Electric

    IC670CBL002 I/O Expansion Cable | GE Fanuc

    GE Fanuc IC670CBL002 21-Inch I/O Expansion Cable Model Full Name and Variants GE Fanuc IC670CBL002 - Base Connection Expansion Cable Compatible with GE Fanuc Field Control Terminal Blocks and Bus Interface Units (BIU) Designed for extended connections on panelboards Technical Specifications Cable Length: 21...
  • IC670CHS001 Field Control I/O Terminal Block | GE FanucIC670CHS001 Field Control I/O Terminal Block | GE Fanuc
    General Electric

    IC670CHS001 Field Control I/O Terminal Block | GE Fanuc

    Technical Parameters Model: IC670CHS001 Number of Terminals: 37 Wire Size Range: AWG #14 (2.1 mm²) to AWG #22 (0.35 mm²) Max Wires per Terminal: 2 (solid or stranded copper wires) Torque for Terminal Screws: 8 in-lb (recommended) Insulation Temperature Rating: 90°C Ground Wire Size:...
  • IC670CHS002 GE Fanuc - Terminal BlockIC670CHS002 GE Fanuc - Terminal Block
    General Electric

    IC670CHS002 GE Fanuc - Terminal Block

    GE Fanuc Field Control IC670CHS002 I/O Base Box Style Terminal Block Technical Parameters Model: IC670CHS002 Number of Terminals: 37 Wire Connection: One AWG #14 (2.1 mm²) or two AWG #18 (0.86 mm²) to AWG #22 (0.35 mm²) wires per terminal Terminal Torque: 4.5 in-lb...
  • IC670CHS003 Terminal Block | GE Fanuc EmersonIC670CHS003 Terminal Block | GE Fanuc Emerson
    General Electric

    IC670CHS003 Terminal Block | GE Fanuc Emerson

    GE Fanuc IC670CHS003 I/O Terminal Block - Connector Style for Field Control Systems Key Technical Specifications Model Number: IC670CHS003 Type: I/O Terminal Block with wire-to-board connectors Number of Terminals: 20 Wire Gauge: AWB 16 to 20 Terminal Torque: 4.5 lb-in Max Current per Terminal:...
  • IC670CHS101 GE Fanuc - Field Control Terminal BlockIC670CHS101 GE Fanuc - Field Control Terminal Block
    General Electric

    IC670CHS101 GE Fanuc - Field Control Terminal Block

    I/O Base Barrier Style Hot Insertion Terminal Block GE Fanuc Field Control IC670CHS101 Key Technical Specifications Parameter Value Model Number IC670CHS101 Number of Terminals 37 Terminal Wiring AWG 14-22 Terminal Torque 4.5 lb-in Max Current per Terminal 10 Amps Modules Supported 2 modules per...
  • IC670FBI001 Field Bus Interface I/O Base | GE FanucIC670FBI001 Field Bus Interface I/O Base | GE Fanuc
    General Electric

    IC670FBI001 Field Bus Interface I/O Base | GE Fanuc

    Product Name: GE Fanuc IC670FBI001 Field Bus Interface I/O Base, Connector Style, Hot Insertion Key Features: Installation Type: Connector style with hot insertion support Compatible Series: IC670C / IC670CH / IC670CHS Nominal Voltage Ratings: 115 Volts AC or 125 Volts DC Voltage Input Range:...
  • IC670GBI001 GE Fanuc Emerson | Genius Bus Interface UnitIC670GBI001 GE Fanuc Emerson | Genius Bus Interface Unit
    General Electric

    IC670GBI001 GE Fanuc Emerson | Genius Bus Interface Unit

    Product Name: GE Fanuc IC670GBI001 Genius Bus Interface Unit for Field Control Key Features: Type: Genius Bus Interface Unit Installation: Panel-mount with durable aluminum housing Compatible Models: IC670 / IC670G / IC670GB / IC670GBI / IC670GBI00 Nominal Voltage Ratings: 115 Volts AC or 125...
  • IC670GBI002 GE Fanuc Emerson | Bus Interface UnitIC670GBI002 GE Fanuc Emerson | Bus Interface Unit
    General Electric

    IC670GBI002 GE Fanuc Emerson | Bus Interface Unit

    IC670GBI002 Bus Interface Unit Overview Key Specifications Supply Voltage Range: 18–30 VDC (nominal 24 VDC) Power Consumption: 16.8 W (Inrush: 15–50 A peak, 3 ms) Backplane Output: 6.5 VDC ±5% @ 1.4 A (holdup time 10 ms) Data Capacity: 128 bytes IN / 128 bytes OUT Module Support: Up to 8 Field I/O modules MTBF: >183 000 hours Operating...
  • IC670MDD441 Field Control Module | GE Fanuc EmersonIC670MDD441 Field Control Module | GE Fanuc Emerson
    General Electric

    IC670MDD441 Field Control Module | GE Fanuc Emerson

    In Stock Now – GE Fanuc IC670MDD441 Field Control Mixed Discrete Module Key Specifications: Input Channels: 10 discrete DC inputs Output Channels: 6 discrete DC outputs Voltage Range (On-State): 15–30 VDC Voltage Range (Off-State): 0–5 VDC Protection: Includes Short Circuit Protection and Electronic Overcurrent...
  • IC670MDL240 Discrete Input Module | GE Fanuc EmersonIC670MDL240 Discrete Input Module | GE Fanuc Emerson
    General Electric

    IC670MDL240 Discrete Input Module | GE Fanuc Emerson

    GE Fanuc IC670MDL240 Electrical Characteristics: Input Signal Range: 0–132 VAC Frequency Range: 47–63 Hz Nominal Input Voltage: 115–120 VAC Input Current per Channel: 15 mA On-State Voltage: 70–132 VAC Off-State Voltage: 0–20 VAC On-State Current: 5–15 mA Off-State Current: 0–2.5 mA Timing Performance: Typical...
  • IC670MDL241 240 VAC Input Module | GE Fanuc EmersonIC670MDL241 240 VAC Input Module | GE Fanuc Emerson
    General Electric

    IC670MDL241 240 VAC Input Module | GE Fanuc Emerson

    GE Fanuc IC670MDL241  Input Characteristics: Total Inputs: 16 Grouping: 2 isolated groups of 8 inputs Rated Voltage: 240 VAC Input Voltage Range: 0–265 VAC Frequency Range: 47–63 Hz Current and Response: On-State Current: 4 to 10 mA Off-State Current: 0 to 1.5 mA On...
  • IC670MDL331 Discrete Output Module - GE Fanuc EmersonIC670MDL331 Discrete Output Module - GE Fanuc Emerson
    General Electric

    IC670MDL331 Discrete Output Module - GE Fanuc Emerson

    GE Fanuc IC670MDL331 Discrete Output Module Electrical & Performance Specs: Number of Channels: 8 Output Groups: 4 groups, 2 channels each Output Voltage Range: 85–132 VAC Frequency: 47–63 Hz Max Output Current per Channel: 2 A Max Output Current per Group: 2 A Max...
  • IC670MDL641 Field Control Module | Discrete Input ModuleIC670MDL641 Field Control Module | Discrete Input Module
    General Electric

    IC670MDL641 Field Control Module | Discrete Input Module

    IC670MDL641 Field Control Module Key Specifications Rated Voltage: 48 Volts DC Input Range: 0 – 60 Volts DC Isolation Voltage: 250 VAC continuous / 1500 VAC (1 min) Inputs: 16 points, grouped (positive/negative logic) User Current: 2.5 mA per point @ 48 VDC On‑State Voltage: +34 to +60 V / –34 to –60 V Off‑State Voltage: 0 to +10 V / 0 to –10 V Response Time: On:...
  • IC670MDL642 GE Fanuc Emerson modul za kontrolu na terenuIC670MDL642 GE Fanuc Emerson modul za kontrolu na terenu
    General Electric

    IC670MDL642 GE Fanuc Emerson modul za kontrolu na terenu

    IC670MDL642 Modul za poljsko upravljanje Ključne specifikacije Nazivni napon: 125 Volti DC Opseg ulaza: 0 – 150 Volti DC Izolacioni napon: 250 VAC kontinuirano / 1500 VAC (1 min) Ulazi: 16 tačaka, grupisano (pozitivna/negativna logika) Korisnička struja: 2.5 mA po tački @ 125 VDC Napon u uključenom stanju: +79 do +150 V / –79 do –150 V Napon u isključenom stanju: 0 do +30 V...
  • IC670MDL643IC670MDL643-1
    General Electric

    IC670MDL643 Modul za kontrolu polja GE Fanuc

    IC670MDL643 Modul za poljsku kontrolu Ključne specifikacije Nazivni napon: 5 / 12 Volti DC Opseg ulaza: 0 – 15 Volti DC Ulazi: 16 diskretnih tačaka, grupisano Korisnička struja: 5 mA @ 5 VDC; 16 mA @ 15 VDC Ulazna impedansa: 1 kΩ tipično Napon u uključenom stanju: +3.6 do +15 V / –3.6 do –15 V Napon u isključenom stanju: 0 do +1.6 V / 0 do –1.6 V Izolacija (grupa‑do‑grupe):...
  • IC670MDL740IC670MDL740-1
    General Electric

    IC670MDL740 GE Fanuc Emerson | Modul diskretnog izlaza

    Brend: GE Fanuc Serija: Field Control Broj modela: IC670MDL740 Tip proizvoda: Modul diskretnog izlaza Tip logike izlaza: Pozitivna logika Broj izlaznih kanala: 16 tačaka, jedna grupa Nominalni izlazni napon: 12/24 Volti DC Opseg izlaznog napona: 9.2–29.5 VDC Izlazna struja po kanalu: 0.5 A Ukupna...
  • IC687BEM731 Genius kontroler autobusa PLC modul/ramIC687BEM731 Genius kontroler autobusa PLC modul/ram
    General Electric

    IC687BEM731 Genius kontroler autobusa PLC modul/ram

    Tehničke specifikacije Specifikacija Detalji 🏷️ Brend GE Fanuc 🔢 Serija RX7i PACsystem 📦 Broj dela IC687BEM731 ⚙️ Tip opreme VME kontroler sabirnice ⚡ Struja 1,3 Ampera na 5V 🔋 Napon 5V sabirnica 📍 Lokacija Može se instalirati na bilo kojoj lokaciji unutar sistema. 🌡️...
  • IC687BEM744 | FIP Bus Controller GE FanucIC687BEM744 | FIP Bus Controller GE Fanuc
    General Electric

    IC687BEM744 | FIP Bus Controller GE Fanuc

    GE Fanuc Automation IC687BEM744 FIP Bus Controller Electrical & Performance Bus Frequency: 2.5 MHzMax Devices: 128Power Draw: 1.2 A @ 5 V (6 W)MTBF: 110,000 hoursBus Speed Tolerance: ±50 ppm Connectivity & Diagnostics Serial Port: 15‑pin, up to 115,200 baudFIP Connectors: two 9‑pinStatus LEDs: 6Diagnostics: Network diagnostics with up to 10 error...
  • IC687RCM711 GE Fanuc Emerson Communications ModuleIC687RCM711 GE Fanuc Emerson Communications Module
    General Electric

    IC687RCM711 GE Fanuc Emerson Communications Module

    IC687RCM711 Key Specifications Series: 90‑70 (IC687 family, suffix RCM711) Current Required: 1.2 Amps (from 5 V bus) Effective Data Rate: 500 KB/sec Maximum Cable Length: 15 m (solid‑core, AWG 24–22) Operating Temperature: −10 °C to 60 °C Storage Temperature: −40 °C to 85 °C MTBF: 50 000 hours Module Weight: 0.15 kg Pushbutton Response Time: 50 ms...