GE Fanuc IC693CBL311 I/O Interface Cable The IC693CBL311 is a high‑performance I/O interface cable designed for GE Fanuc Series 90‑30 Axis Positioning Modules (IC693APU301, IC693APU302). Available in two suffix variants: IC693CBL311‑1M – 3.3 ft (1 m) length IC693CBL311‑3M – 10 ft (3 m) length Technical Specifications Series: Series 90‑30 Connectors:...

Detailed Technical Features • Brand: GE Fanuc• Series: Series 90‑30• Part Number: IC693CBL319• Description: I/O Interface Cable• Cable Length: 3.0 Feet (1.0 Meter)• Connector 1: 24‑Pin Female Connector• Connector 2: 25‑Pin D‑Type Terminal Block• Cable Type: Wye Type with Integrated Shield• Conductor Material: 28 AWG Copper Wire...

IC693MDL660 32-Point 24VDC Discrete Input Module for GE Fanuc Series 90-30 PLC Technical Highlights Specification Value Input Voltage Range 0 - 30 VDC Nominal Voltage 24 VDC Number of Inputs 32 (4 groups × 8 channels) Input Current at Rated Voltage 7 mA (typical)...

Key Features & Specifications: Module Type: Blank Slot Filler (Dummy Module) PartNumber: IC694ACC310 Backplane Current Draw: 0 A (no power consumption) Compatibility: Works with all RX3i PACSystem CPUs and baseplates Slot Coverage: Single Slot Installation: Hot-swappable, safe to insert or remove while powered Environmental...

Key Specifications and Features: Part Number: IC694ACC311 Module Type: Terminal Block (Box-Style) Terminal Count: 20 screw-type terminals Weight: 2 pounds (approx. 0.91 kg) Compatibility: Only with low-density IC694xx I/O modules Wire Gauge Support: AWG #22 to AWG #14 (solid and stranded copper wires) Wiring...

Product Overview: GE Fanuc IC694BEM320 I/O Link Network Interface Module Detailed Functionality Model: IC694BEM320 System Family: RX3i PACSystems Input Configuration: Selectable between 32 or 64 inputs using internal jumper wires Power Supply: 5 VDC supplied via backplane Communication Ports: Dual-port interface supporting RS422 and...

Highlighted Specifications: Operating Voltage: 5 VDC nominal Current Consumption: 1.2 Amps max Connector Type: 9-pin male D-sub Communication Interface: RS-485 Clock Frequency: 2.5 MHz Max Data Exchange: 128 Bytes Front Panel Indicators: 6 Status LEDs indicate: - Operating mode - Communication health - Battery...

Emerson PACSystem RX3i IC695ACC400 CPU Energy Pack: Kritična zaštita podataka pri nestanku napajanja Ključne tehničke specifikacije Proizvođač: Emerson Automation (ranije GE Intelligent Platforms) Tip proizvoda: CPU Energy Pack (Aktivan status životnog ciklusa) Certifikati: U skladu sa EU RoHS Direktivom 2002/95/EC (izuzeci 7(a), 7(c)-I/III) Fizičke...

The IC695NKT001 provides robust networking capability for modular and distributed control systems. This complete kit includes: IC695NIU001 – Network Interface Unit IC695ETM001 – Ethernet Interface Module Core Specifications: Product Type: Ethernet Network Interface Unit (ENIU) Flash Memory: 10 MB built-in Local Logic Memory: 240 KB...

IC695PNC001 PROFINET Controller Module Physical & Power Operating Temp.: 0 °C to 60 °C Storage Temp.: -40 °C to 85 °C Power @ 5.5 VDC: 1.5 A max Power @ 3.3 VDC: 0.5 A idle, 1.2 A with 2 SFPs Dimensions (W×H×D): 130×40×115 mm Weight: 0.19 kg Network & I/O Capacity RJ‑45 Ports: 2 SFP Slots:...

Core Specifications: Part Number: IC695PSD040 Series: PACSystems RX3i Product Type: Power Supply Module Installation Slot: Slot 0 (Universal Backplane) Power Output: 40 Watts max Input Voltage: Start: 18–30 VDC Run: 12–30 VDC Input Power: 60 Watts max Output Details: Outputs: 3 (5.1 VDC, 3.3...

IC695RMX228  Overview The IC695RMX228 features 128 MB SDRAM user memory and supports up to 256 reflective memory nodes per network. With 32‑bit resolution on each of the four fiber‑optic networks, data integrity is ensured at every cycle. Enhanced Performance Maximum throughput of 200 MB/s per network...

GE Fanuc Automation IC697VAL348 8-Channel Digital to Analog Converter Board Key Technical Highlights: Model IC697VAL348 Type Digital to Analog Converter Board (DAC) Output Channels 8 Resolution 16 Bits Voltage Output ±10 Volts Current Output 5 milliamps per channel Connector High-reliability DIN connector Form Factor...

THERMOCOUPLE COLD JUNCTION COMPENSATION BASE GE Fanuc Field Control CHS004 IC670C Key Technical Specifications Specification Value Model Number IC670CHS004 Connection Pins 20 pins Terminal Wiring AWG 16-20 Terminal Torque 4.5 lb-in Maximum Current 10 Amps Compatible Modules Thermocouple I/O Modules Number of Modules Supported...

Product Highlights Brand: GE Fanuc Series: Series 90‑30 Part Number: IC693BEM335 Type: Ethernet Interface Serial Ports: 2 Maximum Throughput: 10 Mbps Typical Response Time: 5 ms Operating Frequency: 2.5 MHz Power Supply: 5 VDC IP Rating: IP20 Hot‑swap: Not supported Status LEDs: 3 Supported Protocols: Modbus TCP, CIP MTBF: 50,000 hours Operating...

Detailed Specifications Series: Series 90‑30 Part Number: IC693CBL313 Application: Daisy‑Chain I/O Expansion and Remote Baseplate Connections Cable Length: 25 ft (7.62 m) Cable Type: Wye Configuration with Continuous Shield Connectors: Single-End: 25‑pin D‑type Male Connector Dual-Head End: 25‑pin D‑type Male and 25‑pin D‑type Female Connectors Wire: 28 AWG...

GE Fanuc IC693MDL390 Discrete Isolated Output Module Technical Highlights Isolation Ratings: 500 V continuous (channel‑to‑channel), 1500 V for 1 min (field‑to‑logic) Inrush Current: 25 A for 1 cycle Response Times: ON ≤ 1 ms; OFF ≤ ½ cycle Output Leakage: 3 mA @ 120 VAC; 6 mA @ 240 VAC Min. Load: 100 mA per point Power Dissipation: 1.3 W...

IC695CMU310 - CPU procesorski modul Ključne karakteristike: Max-ON Vruća Rezerva Redundantna CPU Specifikacije: Zadržavanje memorije baterije: Preporučeno: RX3i CPU litijumska Smart baterija, IC695ACC302 Alternativa: Series 90-30 litijumski baterijski paket, IC693ACC302, ili IC698ACC701 Smart Coin Cell baterijski paket Skladištenje programa: Do 10 Mbytes RAM memorije...

Tehničke specifikacije Brend: GE / Emerson Serija: RX3i PacSystem Broj dela: IC695ETM001 Tip modula: Ethernet interfejs modul Kompatibilnost: PACSystems RX3i Tip proizvoda: Ethernet interfejs modul za PACSystems RX3i seriju. Kompatibilnost: Potpuno kompatibilan sa PACSystems RX3i. Ethernet portovi: Dva 10/100 Mbps porta. Serijske brzine prenosa...

Core Specifications: Brand: GE Fanuc Series: 90-70 Part Number: IC697PWR724 Nominal Rated Voltage: 24 VDC Input Voltage Range: 18 to 32 VDC Input Power: 160 Watts Input Inrush Energy: 22 Joules (maximum) Output Power: 90 Watts (maximum) Output Voltages: 5 VDC at 26 Amps,...