Şartname Detaylar Nominal Akış Arazi başına Δp 5 bar'da (75 psi) 150 ila 250 l/dak (39,6 ila 66 gpm) Maksimum Akış 600 l/dak (158 galon/dakika) Basınç Değeri - P, A, B Bağlantı Noktaları 350 bar (5.000 psi) Basınç Değeri - Port T (Harici Y)...

Product Introduction The MTL-4073 is a sophisticated temperature transmitter designed for hazardous area applications. It converts signals from thermocouples or RTDs into a stable 4-20mA output with configurable parameters for precise process monitoring. Key Features Supports 8 thermocouple types and 2/3/4-wire RTD configurations Software-configurable...

MTL4016 Dual-Channel Relay Isolator with Dual Outputs Dual-Channel, Dual-Output Design • 2 hazardous area inputs control 4 safe-area relays • Independent phase reversal per channel • Line fault detection for both channels • Earth fault monitoring (with MTL4220) Key Specifications Input Voltage: 7-9V DC...

Product Overview The MTL4041B is a precision signal repeater and power supply for hazardous area transmitters. It supports both conventional 4-20mA and smart transmitters with HART communication capabilities, providing safe-area signal conditioning with excellent accuracy. Key Features Supports 2/3-wire 4-20mA transmitters in Zone 0/Div.1...

Product Introduction The MTL4045C safely repeats 4-20mA signals in hazardous areas. This isolator drives I/P converters or loads up to 800Ω with 16V output capability. Its floating input/output circuits ensure reliable operation in Zone 0/Div.1 locations. Key Features Single-channel 4-20mA signal repeater for hazardous...

MTL4073 Hazardous Area Temperature Transmitter Precision temperature monitoring for explosive environments just got smarter. The MTL4073 transforms thermocouple and RTD signals into rock-solid 4-20mA outputs, engineered for mission-critical industrial applications. Why Professionals Choose MTL4073 ✔ 8 thermocouple types supported ✔ Platinum RTD compatibility ✔...

Hazardous Area Signal Isolator with HART Support The MTL4541B safely powers 2/3-wire transmitters in explosive areas while repeating 4-20mA signals to safe zones. This intrinsically safe barrier maintains HART communication for smart instrumentation. Core Capabilities Powers Zone 0/Div.1 transmitters with 16.5V@20mA Bi-directional HART signal...

MTL4544 Dual-Channel HART Transmitter Isolator Dual-Channel Signal Conditioning for Hazardous Areas The MTL4544 provides two independent isolation channels for 2-wire or 3-wire 4-20mA/HART transmitters in Zone 0/Div. 1 hazardous locations. This intrinsically safe solution delivers 16.5V transmitter power while maintaining full HART communication capability....

Dual-Channel Current Sink for Hazardous Areas The MTL4544S provides two independent current sink channels for 4-wire transmitters in explosive environments. This intrinsically safe interface supports 24V sources while maintaining Zone 0 safety standards. Key Advantages Dual-channel design for multi-point monitoring 600Ω current sink capacity...

Technical Specifications Channels: Two isolated 4–20mA inputs Hazardous Area Certification: Zone 0, IIC, T4–6 / Div. 1, Group A Load Capacity: 90Ω (min), 800Ω (max at 16V) HART Support: 500Hz–10kHz digital signal bandwidth Accuracy: ±20µA at 20°C, <1.0µA/°C drift Fault Detection: Open/short circuits trigger...

MTL4549 Dual-Channel 4-20mA HART Signal Converter Dual-Channel Hazardous Area Solution Converts 4-20mA signals to safely control HART devices in Zone 0/Div.1 hazardous locations. Two isolated channels support simultaneous operation of valve positioners, I/P converters, or other field instruments. Key Specifications Channels: 2 fully isolated...

MTL4549 Dual-Channel 4-20mA HART Signal Converter Core Specifications • Channels: 2 isolated 4-20mA paths• HART Support: 500Hz-10kHz bidirectional• Load Capacity: 800Ω per channel (16V @ 20mA)• Accuracy: ±20µA @ 20°C (±1µA/°C drift)• Fault Detection: Open/short-circuit (MTL4549Y = open-only) Performance Highlights • Response Time: 100ms...

MTL4573 Sıcaklık Sinyal Dönüştürücü Desteklenen Girişler ve Minimum AralıkTermokupllar (THC): J, K, T, E, R, S, B, N (BS EN 60584-1:1996'ya göre) — 3mV min. aralıkGOST XK: GOST P8.585-2001 — -75mV ila +75mVRTD'ler: Pt100, Pt500, Pt1000 (BS EN 60751:2008); Cu-50, Cu-53 (GOST 6651-94); Ni100,...

MTL4581 Hazardous Area mV Signal Isolator Core Functionality Isolates low-level DC signals (0-50mV) from hazardous areas • Thermocouple burnout protection • Selectable upscale/downscale operation Technical Specifications Input Range: 0 to ±50mV (±55mV overrange) Accuracy: ±0.05% or 5μV Response Time: 150μs to 10% Temp Drift:...

MTL5511 Switch/Proximity Detector Interface Overview The MTL5511 safely connects hazardous-area sensors to control systems. This interface module works with NAMUR-compliant devices in explosive environments. It provides reliable signal conversion between Zone 0 and safe areas. Key Features Approved for use in hazardous locations Compact...

MTL5514D - Safe Industrial Switching for Hazardous Areas Reliable Sensor Interface The MTL5514D connects hazardous area sensors to control systems. It works with switches and proximity detectors in explosive environments. Two relay outputs provide safe area control. Key Technical Specs Input channels: 1 (NAMUR...

MTL5541 Repeater Power Supply for Hazardous Areas Essential Protection The MTL5541 safely transfers signals from Zone 0 hazardous areas. It provides clean power to transmitters while maintaining signal integrity. Precision Performance Transfer accuracy: ±15μA at 20°C Temperature stability: <0.8μA/°C drift Fast response: 50μs to...

MTL5541S Repeater Power Supply Isolator Core Functionality DIN-rail mounted isolator for precise signal transfer in hazardous areas. Provides safe power to transmitters with minimal signal distortion. Key Specifications • Input/Output: 1 channel analog (0-24mA) • Ripple: <50µA peak-to-peak • Accuracy: ±15µA at 20°C •...

MTL5573 Temperature Transmitter for Hazardous Areas Core Specifications Input Channels 1 channel (Zone 0, IIC, Div.1 Groups A-D) Sensor Types Thermocouples & RTDs Output Signal 4-20mA into 600Ω max Technical Parameters RTD Excitation 200μA nominal CJC Accuracy ≤1.0°C error Noise Rejection 120dB CMRR /...

Passive Speed Sensor 70085-1010-414 by AI-Tek Instruments Product Overview This is a new original passive speed sensor. It is used to measure rotational speed. It comes in its original factory packaging. It has a 12-month warranty. We ship fast with Fedex, UPS, and DHL....