Allen-Bradley 1790D-0W6 6-Relay Output Module
الطلبات الكبيرة والشحن السريع
خصم فوري 10% على بطاقات الائتمان/الخصم البنكية الشتوية بالتقسيط وبطاقة الائتمان
شحن سريع وموثوق إلى جميع أنحاء العالم – جاهز للشحن من المخزون
- شحن سريع
- سياسة الإرجاع
- أقل سعر
- مركز المساعدة 24/7
-
Vendor:
Allen-Bradley
-
Type:
Output Module
- Tags Output module
About the Product
Allen-Bradley 1790D-0W6 6-Relay Output Module Product Introduction
Key Technical Specifications
- The 1790D-0W6 features six Form A (normally open) relays with single pole, single throw configuration.
- Each relay can switch 2.0A at 5-28.8V DC or 2.0A at 30V AC with resistive loads.
- The module has a low on-state voltage drop of 0.5V maximum at 2.0A, 24V DC.
- Initial contact resistance is only 30 mΩ for efficient power transmission.
- Relay switching delay times are 10 ms maximum for both off-to-on and on-to-off transitions.
Power Requirements & Wiring
- The module operates with a DeviceNet power supply rated at 24V DC nominal (11-28.8V DC range).
- Field power supply requires 19.2-28.8V DC for proper relay operation.
- Each channel has independent common terminals (1 point/1 COM) for wiring flexibility.
- All connections utilize a standard 37-pin D-shell connector for secure installation.
- The module has a maximum power dissipation of 1.2W from DeviceNet power.
Relay Performance & Durability
- The relays offer photocoupler isolation with 1250V AC RMS rating between I/O and logic circuits.
- Expected contact life is 300,000 cycles for resistive loads and 100,000 cycles for inductive loads.
- Each channel features green LED status indicators for immediate visual feedback.
- Minimum load requirement is 100 µA at 100 mV DC per input channel.
- Off-state leakage current is limited to 1.5 mA maximum for energy efficiency.
Frequently Asked Questions (FAQ)
-
Q: What type of relays does the 1790D-0W6 module use?
A: The module uses six Form A (normally open) SPST relays with independent contacts. -
Q: What voltage and current can these relays switch?
A: Each relay can switch up to 2.0A at 5-28.8V DC or 30V AC with resistive loads. -
Q: What is the expected lifespan of the relays?
A: The relays are rated for 300,000 cycles with resistive loads and 100,000 cycles with inductive loads. -
Q: Does this module support both AC and DC loads?
A: Yes, the 1790D-0W6 can switch both DC (5-28.8V) and AC (30V) loads up to 2.0A. -
Q: What is your shipping and return policy?
A: We ship within 5 days via major carriers and offer a 30-day return policy for customer satisfaction.
© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | Phone: +86 153 9242 9628
عروض سريعة ومعلومات
- عروض سريعة: استلم الأسعار والتوافر بسرعة من فريق خدمة العملاء المخصص لدينا.
- التوصيل: شحن سريع، شحن بضائع، وشحن دولي متاح في جميع أنحاء العالم.
- الضمان: تقدم NexAuto ضمانًا لمدة 12 شهرًا على جميع القطع المشتراة منا، بالإضافة إلى أي تغطية من الشركة المصنعة.
- الإرجاع: سياسة إرجاع لمدة 30 يومًا للقطع المعيبة أو غير المطابقة، لضمان راحة البال.
- الدفع: خيارات مرنة تشمل بطاقات الائتمان الرئيسية، باي بال، والتحويلات البنكية.
- المعايرة المخصصة: قدّم مواصفاتك، وسنتولى الباقي بدقة.

حلول كهربائية صناعية
معدات الأتمتة الشاملة لكل منشأة
وحدات التحكم المنطقية القابلة للبرمجة، واجهات المستخدم البشرية، محركات السيرفو، الحساسات، والكابلات لعمليات موثوقة.
بنتلي نيفادا
حلول مراقبة الحالة
مستشعرات القرب وأجهزة الاستشعار وأنظمة المراقبة لحماية الآلات الحيوية.
آلن-برادلي
مكونات الأتمتة الصناعية
وحدات التحكم المنطقية القابلة للبرمجة (PLC) عالية الجودة، وواجهات الإنسان والآلة (HMI)، ووحدات الإدخال/الإخراج لأنظمة التحكم الموثوقة.
هاني ويل
وحدات التحكم، الإدخال/الإخراج والواجهات
قطع جديدة لدعم منصات DCS وتركيبات PLC.
مقالات المدونة
-
ترقية خطوط الإنتاج باستخدام AB PLC | بيانات الأداء والعائد على الاستثمار
ترقية AB PLC تقلل وقت التوقف بنسبة 45%، وتسترد التكلفة خلال 8-14 شهرًا. مقاييس حقيقية... -
أنظمة ABB للتحكم والمحركات للبيئات الصناعية القاسية
تضمن محركات ABB تشغيلًا مستقرًا في درجات الحرارة القصوى والغبار والاهتزاز. بيانات حقيقية من 12,000...
-
أنظمة التحكم في AB تعزز كفاءة المصنع بنسبة 30%
تُظهر بيانات عام 2025 زيادة بنسبة 30%. ضبط PID، إصلاحات التأخير، والصيانة التنبؤية تحقق نتائج...

















