31000-16-10-15-163-01-02 | Proximity Probe Housings

Bently Nevada 31000-16-10-15-163-01-02 Proximity Probe Housings

Core Model Breakdown
31000-16-10-15-163-01-02:
- 16 = 3300 XL 8 mm probe (operational frequency: 0-10 kHz)
- 10 = 1.0 m (39 in) probe cable (insulation resistance: ≥100 MΩ at 500V DC)
- 15 = 1.5 in (38 mm) minimum standoff adapter (tolerance: ±0.2 mm)
- 163 = 16.3 in probe penetration (accuracy: ±0.5%)
- 01 = One 3/4-14 NPT fitting + two plugs (thread pitch: 14 threads per inch)
- 02 = 3/4-14 NPT mounting thread (required for standoff adapter)

Protection & Certification
- Type 4X (CSA): Dust-tight & water-resistant (tested with 6.9 kPa air pressure for 5 minutes)
- IP66 (SC115582-1): Withstands 100 L/min water jets at 100 kPa for 3 minutes
- EN50014: Electrostatic dissipation ≤10^9 Ω surface resistivity

Material Specifications
- Housing: Glass-reinforced PPS (tensile strength: 120 MPa; flexural modulus: 8.5 GPa)
- Sleeve/Chain: AISI 304 stainless steel (yield strength: 205 MPa)
- Outer Sleeve/Screws: AISI 303 stainless steel (hardness: 85 HRB)
- O-Ring: Neoprene® (compression set: ≤30% at 70°C/22h)

Performance Ratings
- Temperature Range: -51°C to +105°C (-60°F to +221°F)
- Impact Resistance: 4 J at -39°C & 115°C (BASEEFA); 7 J at 25°C (CSA)
- Load Capacity: 912 N (205 lb) at 38 mm from unsupported end
- Recommended Torque: 29.4 N·m (260 in·lb) for retaining nut