-
Vendor: General Electric
GE Fanuc - High Capacity Power Supply IC693PWR330
GE Fanuc High Capacity Power Supply (IC693PWR330) Specifications Power: 30 Watts Weight: 0.64 kg Nominal Input Voltage: 120/240 VAC or 125 VDC Input Voltage Range (AC): 85 to 264 VAC Input Voltage Range (DC): 100 to 300 VDC Key Features High Efficiency: Designed for... -
Vendor: General Electric
GE Fanuc - IC200PWR012 DC Power Supply
GE Fanuc Versamax DC Power Supply Model: IC200PWR012 (suffix PWR012 indicates isolated DC power module) Key Specifications Input Voltage: 18 – 30 V DC Input Power: 11 W Inrush Current: 20 A @ 24 V DC Output Voltages: 5 V DC & 3.3 V... -
Vendor: General Electric
GE Fanuc - IC200TBM005 | I/O Terminal Strip
Additional Specifications: Terminal Count: 18 individual spring-clamp terminals Mounting Method: Compatible with 35 mm DIN rails and direct panel installation Rated Insulation Voltage: 300 VAC max Contact Resistance: Less than 15 mΩ (measured at 1A, 5V DC) Dielectric Strength: 2000 VAC for 1 minute... -
Vendor: General Electric
GE Fanuc - IC693MDL653 Programmable Logic Controller
Key Technical Specifications: Full Model: IC693MDL653 Series: 90-30 Programmable Logic Controller Nominal Input Voltage: 24 VDC Input Voltage Range: 19.2 VDC to 28.8 VDC Input Signal Operating Range: 19.2 VDC to 26.4 VDC Input Current per Channel: 7.5 mA at 24 VDC Minimum On-State Voltage: 15 VDC Maximum Off-State Voltage: 6... -
Vendor: General Electric
GE Fanuc - IC693PWR328 Power Supply Module
IC693PWR328 Key Technical Specifications Input Voltage: 48 Volts DC Output Voltage (Relay): 24 Volts DC, 15 Watts Output Voltage (Isolated): 24 Volts DC, 20 Watts Output Voltage (CPU): 5 Volts DC, 15 Watts Total Power Output: 30 Watts Max Communication Port: RS 485 Serial... -
Vendor: General Electric
GE Fanuc - IC693TCM303 Temperature Control Module
GE Fanuc IC693TCM303 Temperature Control Module Technical Specifications Model: IC693TCM303 Input type: Thermocouple (max impedance 35 Ohms) Output voltage range: 18 to 30 Volts DC Load current per output: 100 mA External power supply: 18 to 36 Volts DC, 2.5 Amps inrush Operating temperature:... -
Vendor: General Electric
GE Fanuc - IC694DNM200 DeviceNet Master Module
Meet the IC694 DNM200 (DeviceNet Master Module), designed for the PACSystem RX3i and Series 90‑30 platforms. This module enables seamless communication with up to 63 DeviceNet slaves and supports robust data exchange of 255 Bytes input and 255 Bytes output per node. Model Suffix: DNM200 Ports: 1... -
Vendor: General Electric
GE Fanuc - IC695ECM850 Ethernet Communication Module
Overview The GE Fanuc IC695ECM850 Ethernet communication module connects RX3i PacSystem controllers to IEC 61850 networks, enabling seamless substation automation. Key Features 4 switched Ethernet ports (RJ‑45 ×2, SFP cages ×2) Supports 10/100/1000 Mbps over copper and 100/1000 Mbps over single‑mode & multi‑mode fiber Hot‑swappable—install or remove... -
Vendor: General Electric
GE Fanuc - IC697CPU780 Expandable Floating Point CPU
IC697CPU780 Overview Model & Suffix Explanation “IC697CPU” identifies the Series 90-70 CPU line, while the suffix 780 designates the redundant-ready version with enhanced memory and synchronization features. Detailed Specifications Processor: 80386DX microprocessor @ 16 MHz Boolean Execution Speed: 0.4 µs per instruction Discrete I/O... -
Vendor: General Electric
GE Fanuc - IC697MEM719 Expansion Memory Module
IC697MEM719 CMOS Expansion Memory The IC697MEM719 module seamlessly extends program and data storage on GE Series 90‑70 CPUs (models 771/772) and PCMs. Highlights Capacities: 64 KB, 128 KB, 256 KB, 512 KB Shelf Life: 1 year @ 20 °C Retention: 6 months without power Temp Range: –20 °C to +60 °C Power: 150 mW typical MTBF: 100,000 hrs @ 25 °C... -
Vendor: General Electric
GE Fanuc - Single Slot CPU Module IC693CPU372
GE Fanuc - Single Slot CPU Module IC693CPU372 User Memory: 120 KB Processor Model: AMD SC520 Processor Speed: Operates at 133 MHz I/O Point Capacity: Supports up to 2048 I/O points Typical Scan Time: 0.15 ms per 1K of Boolean logic Register Memory: 240... -
Vendor: General Electric
GE Fanuc - Standard Power Supply IC693PWR321
GE Fanuc - Standard Power Supply IC693PWR321 Input Voltage: 120/240 VAC or 125 VDC AC Input Range: 85 to 264 VAC DC Input Range: 100 to 300 VDC Input Power Rating: 90 VA (AC), 50 W (DC) Output Specifications 5V DC Output: Ranges from... -
Vendor: General Electric
GE Fanuc 100% Genuine New IC695CRH003 Harness Assembly
GE Fanuc IC695CRH003 Harness Assembly for RX3i PACSystems Core Specifications Brand: GE Fanuc Series: RX3i PACSystem Part Number: IC695CRH003 Product Type: Harness Assembly Compatible Modules: IC697MDL250 (90-70) and IC694MDL260 (RX3i) Voltage Type: AC Voltage Rating: 120 Volts AC Electrical and Mechanical Characteristics Number of... -
Vendor: General Electric
GE Fanuc Analog Input Module - IC694ALG233
About the Model Number – IC694ALG233: IC694: Indicates PACSystems RX3i product line ALG: Denotes Analog input module type 233: Specific model for 16-channel analog current input with diagnostics and enhanced features Key Technical Details of IC694ALG233: Total Input Channels: 16 Single-ended Supported Input Ranges:... -
Vendor: General Electric
GE Fanuc Bus Controller Module IC697BEM731
📦 IC697BEM731 Bus Controller Module Genius I/O System Component Specifications Part Number: IC697BEM731 Operating Voltage: 5.0 Volt DC Backplane Current: 1.3 Amps Type: Bus Controller Module Width: Single Slot Weight: 0.907 kg Features Built-in Ports: 1 Bus Controller, 1 Hand-Held Terminal Data Rates: 153.5K/76.8K/38.4K... -
Vendor: General Electric
GE Fanuc Discrete Input Module | IC697MDL640
GE Fanuc IC697MDL640 Electrical Specifications Rated voltage: 125 V DCInput current: 5 mA per pointTotal current required: 0.3 AInput range: –35 to 145 V DCInput impedance: 20 kΩ nominal Physical Dimensions & Weight Width: 25 mmHeight: 128 mmDepth: 118 mmWeight: 0.8 kgShelf life: 1 year Operational Characteristics Operating temperature: –20 °C to +60 °CInsulation voltage: 1500 VrmsMounting shock: 50 g,... -
Vendor: General Electric
GE Fanuc Discrete Output Module IC200MDL742
🔍 GE Fanuc VersaMax Discrete Output Module General Information Manufacturer: GE Fanuc Product Number: IC200MDL742 Type: VersaMax Discrete Output Module Output Specifications Voltage Range: 18-30 VDC (Nominal 24 VDC) Points Available: 32 Current Rating (per Point): 0.5 A Switching Response Time: 0.5 ms for... -
Vendor: General Electric
GE Fanuc Emerson - I/O Interface Cable IC693CBL310
Key Technical Specifications: Brand: GE Fanuc Series: Series 90-30 PLC Part Number: IC693CBL310 Description: I/O Interface Cable Assembly Kit Cable Length: 10 feet (3.05 meters) per cable Connector Type: 24-Pin Female Fujitsu Connector Cable Type: Interface Cable with Stripped and Tinned Colored Lead Wires... -
Vendor: General Electric
GE Fanuc Emerson - IC693ACC337 Interface Terminal Block
Product Overview The IC693ACC337 terminal block quick‑connect system for GE Fanuc Series 90‑30 PLC simplifies I/O wiring with a snap‑on DIN‑rail mount and factory‑made cable interface. Quick Installation Mounts in under 2 minutes on standard DIN rail No tools beyond captive screwdriver Over 500 mating cycles... -
Vendor: General Electric
GE Fanuc Emerson - IC693BEM332 Bus Expansion Module
Key Features of IC693BEM332: Full Model Number: IC693BEM332 (BEM - Bus Expansion Module, 332 - FIP I/O Interface Variant) Compatible Series: GE Fanuc Series 90-30 Programmable Logic Controllers Communication Standard: Factory Instrumentation Protocol (FIP) Transmission Speed: 2.5 MHz for fast and stable data exchange...
Available 24/7 at
+86 15392429628
Vendor: Honeywell
51305907-175 Honeywell 16-Channel Low Level Multiplexer
Honeywell MC-TAMR04 51305907-175 Low Level Analog Input Multiplexer The Honeywell MC-TAMR04 51305907-175 provides reliable signal routing for low level analog inputs in industrial control systems. This 16-channel multiplexer ensures accurate signal switching with solid-state reliability. Electrical Specifications Input signal range: ±50mV to ±10V user...
Vendor: Foxboro
Foxboro FCP280 RH924WA Fiber Adapter
Foxboro FCP280 RH924WA Fiber Adapter Technical Specifications Power Specifications Input Voltage: 24V DC redundant power supply Power Consumption: 11W (single module with redundant adapters) Fault-Tolerant Power: 20W (redundant pair with network adapters) Power Protection: Reverse polarity and overvoltage protection Processing Performance Processor: ARM System on...
Vendor: Bently Nevada
PROXPAC XL Proximity Transducer 330880-16-40-037-03-02
Bently Nevada PROXPAC XL Proximity Transducer Manufacturer: Bently Nevada Product No.: 330880-16-40-037-03-02 Product Type: PROXPAC XL Proximity Transducer Made in: U.S.A Certificate Availability: Can add on Certificate Of Origin (COO) Probe and Configuration Options: Probe and Approvals Option: 16 (3300 XL 8 mm probe...
- Choosing a selection results in a full page refresh.