-
Product Specifications Brand: GE Fanuc Series: VersaMax I/O Manufacturer: GE Fanuc Part Number: IC200MDL240 Description: Discrete Input Module Product Description: Discrete Output Module Application: VersaMax I/O and Control System No. of Channels: Sixteen (16) Operating Voltage: 120 Volts AC Input Signal, Nominal: 120 VAC...
-
IC200MDL241 - GE Fanuc VersaMax AC Input Module Description: Discrete Input Module Specifications: Application: VersaMax I/O and Control System Operating Voltage: 240 Volts AC Backplane Current Rating: 110 milliamps Maximum Response Time (On): 1 Cycle Built-in Power: Yes Number of Inputs: 16 Discrete Inputs...
-
Product Specifications Brand: GE Fanuc Series: Versamax Part Number: IC200MDL243 Description: Discrete Input Module Application: VersaMax I/O and Control System Operating Voltage: 120 Volts AC Backplane Current Rating: 100 mA Input Voltage: 0 to 132 VAC (47 to 63 Hz), 120 VAC nominal On...
-
IC200MDL244 Discrete Input Module Key Specifications Part Number: IC200MDL244Brand: GE FanucWeight: 0.24 KgSeries: VersaMax Description: Discrete Input ModuleApplication: VersaMax I/O and Control SystemEnvironmental Rating: IP20Current Consumption: 30 mA Electrical Specifications Operating Voltage: 240 Volts AC Backplane Current Rating: 60 milliamps Maximum Response Time (On):...
-
Specifications for IC200MDL330 General Information Part Number: IC200MDL330 Description: Discrete Output Module Electrical Specifications Operating Voltage: 120 Volts AC Output Signal, Nominal: 120 VAC Output Signal Range: 0-132 VAC Current Drawn from BIU Power Supply: 140 mA maximum Output Characteristics Number of Outputs: Sixteen...
-
Technical Specifications for IC200MDL631 Manufacturer: GE Fanuc Series: Versamax Part Number: IC200MDL631 Product Type: Versamax Isolated Input Module Number of Inputs: 8 Nominal Voltage: 125 Volts DC On State Voltage: 90VDC to 150VDC Off State Voltage: 0VDC to 30VDC On State Current: 1.0mA minimum...
-
Manufacturer: GE Fanuc Series: Versamax Part Number: IC200MDL632D Product Description: Discrete Input Module Number of Inputs: 16 Isolated Inputs: Yes Number of Channels: 16 Nominal Voltage: 125 Volts DC Input Signal (Nominal): 125 VDC Continuous Isolation Voltage: 250 Volts AC Input Signal Range: 0-150...
-
Technical Specifications for IC200MDL635 Manufacturer: GE Fanuc Series: Versamax Part Number: IC200MDL635 Product Type: Input Module Number of Inputs: 16 Input Groups: 2 Groups of 8 Nominal Voltage: 48 Volts DC Operating Voltage: 0 to 60 Volts DC Weight: 0.25 kg Off State Voltage:...
-
Technical Specifications Brand & Model: Parameter Value 🏷️ Brand GE Fanuc (Emerson Automation/GE Intelligent Platforms) 🔢 Model Number IC200MDL650 📊 Series VersaMax I/O Inputs: Parameter Value 🔌 Number of Inputs 32 (8 channels per group across 4 groups) 🔋 Nominal Input Voltage 24 VDC...
-
Product Specifications Brand: GE Fanuc Series: Versamax Part Number: IC200MDL730 Product Description: Discrete Output Module Backplane Current Consumption: 5 Volts, 50 milliamps External Power Supply: 18 to 30 VDC, 24 VDC nominal Dimensions: 3.5 cm x 13 cm x 13.5 cm Weight: 0.3 kg...
-
Product Specifications Brand: GE Fanuc Series: Versamax Part Number: IC200MDL744 Product Description: Discrete Output Module Number of Points: 32 Outputs Number of Groups: 2 Output Voltage (5VDC-TTL mode): 4.75 to 5.25 Volts DC Output Voltage (12/24VDC mode): 10.2 to 30 Volts DC Group to...
-
IC200MDL940 - GE VersaMax Relay Output Module Description: Relay Output Modules: IC200MDL940 and BXIOOR162 provide 16 individually-isolated Form A relay outputs. Specifications: Voltage: 24 V DC / 120-240 Volts AC Current: 2 Amperes Number of Channels: Sixteen (16) Points: 16 Output Contact Form: Normally...
-
Specifications for IC200PWB001 General Information Brand: GE Fanuc Series: Versamax Part Number: IC200PWB001 Physical Dimensions Dimensions: 66.8 mm (2.63 in) x 133.4 mm (5.25 in) x 70 mm (2.75 in) Weight: 0.11 kg Electrical Specifications Operating Voltage: 24 V DC Power Consumption: 2.5 W...
-
IC200PWR101 GE Fanuc 120/240VAC Power Supply Specifications Input Voltage: 85 to 132 VAC (jumper installed), 176 to 264 VAC (jumper not installed) Input Power: 27 VA Frequency: 47 to 63 Hz Holdup Time: 20 ms Efficiency: Approximately 82% at full load Power Factor: 0.9...
-
Product Overview for IC200UAR028 🔧 Model: IC200UAR028 Series: VersaMax Type: Micro Controller Processor Description: 28 Point PLC with 16 Inputs at 120 VAC and Multiple Relay Outputs Inputs: 16 at 120 VAC Relay Outputs: 4 at 10 Amps, 8 at 2 Amps Power Supply:...
-
Specifications for IC200UDD110 General Information Manufacturer: GE Fanuc Product No.: IC200UDD110 weight：0.46kg Product Type: 28-Point Micro PLC Power Supply Inputs & Outputs Inputs: Sixteen 24Vdc positive logic inputs (4 groups of 4) Outputs: Twelve transistor outputs, 24Vdc Load Capacity: 4 outputs at 0.5A; 2...
-
Product Specifications Brand: GE Fanuc Series: Versamax Part Number: IC200UEX009 Type: Micro Expansion Unit Number of Inputs: 8 Input Voltage: 120 VAC Total Relay Outputs: 6 10 Amp Outputs: 2 individual outputs 2 Amp Outputs: 4 outputs in one group Weight: 1.15 lbs (0.52...
-
Product Specifications Model: IC200UEX014 Brand: GE Fanuc Inputs: 8 inputs at 24 VDC Outputs: 6 outputs at 24 VDC Power Supply: 24 VDC Estimated Shipping Weight: 0.36 kg Dimensions: 3.8" x 3.5" x 3.0" (9.5 cm x 9.0 cm x 7.6 cm) Operating Temperature:...
-
Technical Specifications Analog Inputs Parameter Value Analog Inputs Four (4) analog inputs Supported Signals 0–10 VDC, 10 VDC, ±10 VDC, ±5 VDC, 0–5 VDC, and 4–20 mA (1–5 VDC) Resolution 12 bits + sign for high-precision data processing Circuit Range Selection 0-10V DC, ±10V...
-
Technical Specifications Parameter Details Manufacturer GE Fanuc Part Number IC670ALG320 Series Field Control Nominal Supply Voltage 24 VDC Output Signal Options 0-20 mA, 4-20 mA, 0-10 VDC, 0-12.5 VDC Current Output Range 4-20 mA Voltage Output Range 0-10 VDC Number of Channels 4 (Four...
SUBSCRIBE TO OUR NEWSLETTER
Get the latest updates on new products and upcoming sales