-
Vendor: General Electric
GE Fanuc - IC693TCM303 Temperature Control Module
GE Fanuc IC693TCM303 Temperature Control Module Technical Specifications Model: IC693TCM303 Input type: Thermocouple (max impedance 35 Ohms) Output voltage range: 18 to 30 Volts DC Load current per output: 100 mA External power supply: 18 to 36 Volts DC, 2.5 Amps inrush Operating temperature:... -
Vendor: General Electric
GE Fanuc - IC694DNM200 DeviceNet Master Module
Meet the IC694 DNM200 (DeviceNet Master Module), designed for the PACSystem RX3i and Series 90‑30 platforms. This module enables seamless communication with up to 63 DeviceNet slaves and supports robust data exchange of 255 Bytes input and 255 Bytes output per node. Model Suffix: DNM200 Ports: 1... -
Vendor: General Electric
GE Fanuc - IC695ECM850 Ethernet Communication Module
Overview The GE Fanuc IC695ECM850 Ethernet communication module connects RX3i PacSystem controllers to IEC 61850 networks, enabling seamless substation automation. Key Features 4 switched Ethernet ports (RJ‑45 ×2, SFP cages ×2) Supports 10/100/1000 Mbps over copper and 100/1000 Mbps over single‑mode & multi‑mode fiber Hot‑swappable—install or remove... -
Vendor: General Electric
GE Fanuc - IC697MEM719 Expansion Memory Module
IC697MEM719 CMOS Expansion Memory The IC697MEM719 module seamlessly extends program and data storage on GE Series 90‑70 CPUs (models 771/772) and PCMs. Highlights Capacities: 64 KB, 128 KB, 256 KB, 512 KB Shelf Life: 1 year @ 20 °C Retention: 6 months without power Temp Range: –20 °C to +60 °C Power: 150 mW typical MTBF: 100,000 hrs @ 25 °C... -
Vendor: General Electric
GE Fanuc 100% Genuine New IC695CRH003 Harness Assembly
GE Fanuc IC695CRH003 Harness Assembly for RX3i PACSystems Core Specifications Brand: GE Fanuc Series: RX3i PACSystem Part Number: IC695CRH003 Product Type: Harness Assembly Compatible Modules: IC697MDL250 (90-70) and IC694MDL260 (RX3i) Voltage Type: AC Voltage Rating: 120 Volts AC Electrical and Mechanical Characteristics Number of... -
Vendor: General Electric
GE Fanuc Bus Controller Module IC697BEM731
📦 IC697BEM731 Bus Controller Module Genius I/O System Component Specifications Part Number: IC697BEM731 Operating Voltage: 5.0 Volt DC Backplane Current: 1.3 Amps Type: Bus Controller Module Width: Single Slot Weight: 0.907 kg Features Built-in Ports: 1 Bus Controller, 1 Hand-Held Terminal Data Rates: 153.5K/76.8K/38.4K... -
Vendor: General Electric
GE Fanuc Emerson - IC693BEM332 Bus Expansion Module
Key Features of IC693BEM332: Full Model Number: IC693BEM332 (BEM - Bus Expansion Module, 332 - FIP I/O Interface Variant) Compatible Series: GE Fanuc Series 90-30 Programmable Logic Controllers Communication Standard: Factory Instrumentation Protocol (FIP) Transmission Speed: 2.5 MHz for fast and stable data exchange... -
Vendor: General Electric
GE Fanuc Emerson - IC694ACC310 Filler Module
Key Features & Specifications: Module Type: Blank Slot Filler (Dummy Module) PartNumber: IC694ACC310 Backplane Current Draw: 0 A (no power consumption) Compatibility: Works with all RX3i PACSystem CPUs and baseplates Slot Coverage: Single Slot Installation: Hot-swappable, safe to insert or remove while powered Environmental... -
Vendor: General Electric
GE Fanuc Emerson - IC694BEM320 Network Interface Module
Product Overview: GE Fanuc IC694BEM320 I/O Link Network Interface Module Detailed Functionality Model: IC694BEM320 System Family: RX3i PACSystems Input Configuration: Selectable between 32 or 64 inputs using internal jumper wires Power Supply: 5 VDC supplied via backplane Communication Ports: Dual-port interface supporting RS422 and... -
Vendor: General Electric
GE Fanuc Emerson - IC695NKT001 Ethernet Module
The IC695NKT001 provides robust networking capability for modular and distributed control systems. This complete kit includes: IC695NIU001 – Network Interface Unit IC695ETM001 – Ethernet Interface Module Core Specifications: Product Type: Ethernet Network Interface Unit (ENIU) Flash Memory: 10 MB built-in Local Logic Memory: 240 KB... -
Vendor: General Electric
GE Fanuc Emerson - IC695RMX228 Memory Module
IC695RMX228 Overview The IC695RMX228 features 128 MB SDRAM user memory and supports up to 256 reflective memory nodes per network. With 32‑bit resolution on each of the four fiber‑optic networks, data integrity is ensured at every cycle. Enhanced Performance Maximum throughput of 200 MB/s per network... -
Vendor: General Electric
GE Fanuc Emerson IC693BEM335 Ethernet Interface Module
Product Highlights Brand: GE Fanuc Series: Series 90‑30 Part Number: IC693BEM335 Type: Ethernet Interface Serial Ports: 2 Maximum Throughput: 10 Mbps Typical Response Time: 5 ms Operating Frequency: 2.5 MHz Power Supply: 5 VDC IP Rating: IP20 Hot‑swap: Not supported Status LEDs: 3 Supported Protocols: Modbus TCP, CIP MTBF: 50,000 hours Operating... -
Vendor: General Electric
GE Fanuc Emerson IC695ETM001 RX3i Ethernet module
Technical Specifications Brand: GE / Emerson Series: RX3i PacSystem Part Number: IC695ETM001 Module Type: Ethernet Interface Module Compatibility: PACSystems RX3i Product Type: Ethernet interface module for the PACSystems RX3i series. Compatibility: Fully compatible with PACSystems RX3i. Ethernet Ports: Two 10/100 Mbps ports. Serial Data... -
Vendor: General Electric
GE Fanuc Field Control | IC670MDL742
Brand: GE Fanuc Series: Field Control Model Number: IC670MDL742 Product Type: Negative Logic Output Module Logic Type: Negative Logic (Current Sinking) Number of Outputs: 16 Channels, Single Group User Input Voltage: 4.75–5.25 VDC / 10.5–28.5 VDC Output Voltage Range: 4.5–28.25 VDC Maximum Output Current... -
Vendor: General Electric
GE Fanuc IC200ETM001 Expansion Transmitter Module
Technical Specifications for IC200ETM001 🔌 Brand: GE Fanuc Series: Versamax Part Number: IC200ETM001 Product Type: Expansion Connector Connector Type: 26-pin Female Connector LED Indicators: 2 Power Supply: CPU/NIU Modules: Isolated/Non-Isolated Connect Capacity: 7 Receiver Modules Data Rate: 250 bits/sec Isolated Module Expansion Cable Length:... -
Vendor: General Electric
GE Fanuc IC693BEM340 PLC Communication Module
Technical Specifications Brand: GE FanucModel Number: IC693BEM340Series: Series 90-30Module Type: PLC Communication Module Power and Environmental Specifications Parameter Details 🔋 Power Supply Limitation Dependent on the PLC's power supply capacity. ⚡ Typical Power Consumption 800 mA ⚡ Maximum Power Consumption 1.2 A Environmental Conditions... -
Vendor: General Electric
GE Fanuc IC695CMX128 Control Memory Xchanger Module
🛠 Technical Specifications Product Information Parameter Specification Model IC695CMX128 Brand GE Fanuc Series RX3i PacSystem User Memory 128MB SDRAM Bus Speed 2.1 Gbps Network Transfer Rate 43 MB/s (standard), 174 MB/s (max) Packet Size 4 to 68 bytes, dynamic Power Requirements 253 mA at... -
Vendor: General Electric
GE Fanuc IC695RMX128 Redundancy Exchange Memory Module
Technical Specifications Brand and Series: Parameter Value 🏷️ Brand and Series Emerson Automation, RX3i PACSystem 🔢 Model IC695RMX128 📦 Type Redundancy exchange memory module Memory and Communication: Parameter Value 💾 Memory Capacity 128 MB SDRAM for reliable data storage 🔌 Communication Protocol Single-mode fiber-optic... -
Vendor: General Electric
GE Fanuc IC698RMX016 Redundant Memory Exchange Module
Technical Specifications General Information: Parameter Value 🏷️ Brand GE Fanuc (Emerson Automation) 🔢 Model Number IC698RMX016 🔧 Series PACSystem RX7i 🔄 Module Type Redundancy Memory Exchange ⚡ Operating Voltage 5 Volts DC (from power supply) ⚡ Current Requirements 1.8 Amps Memory: Parameter Value 💾... -
Vendor: General Electric
GE Fanuc RX3i CANopen Master Module - IC695CNM001
Model Number Details:IC695CNM001 IC695 – Identifies the RX3i series CNM – CANopen Network Master 001 – Series identifier for module type and version Key Technical Features: Backplane Current: 800 mA at 3.3V DC Slave Device Support: Up to 5 devices CANopen Baud Rate Range:...
Available 24/7 at
+86 15392429628
Vendor: Invensys Triconex
Invensys Triconex 8306A Power Supply Unit | Tricon System Power
Triconex 8306A Power Supply Expansion Unit The Triconex 8306A serves as a dedicated power enhancement solution for growing Tricon installations. This auxiliary power unit supplies supplementary electrical energy to accommodate additional system modules and peripheral devices. Engineered for high-availability environments, the equipment guarantees uninterrupted...
Vendor: Invensys Triconex
Invensys Triconex 9832 Communication Module | Tricon System
Triconex 9832 Communication Module Overview The Triconex 9832 Communication Module enables seamless network integration for Tricon safety systems. This advanced interface module provides reliable data exchange between Tricon controllers and host systems. Designed for industrial environments, the module ensures secure and efficient communication while...
Vendor: Invensys Triconex
Triconex Model 9562 | Triple Modular Redundant DI Module
Triconex 7400165-280 TMR Digital Input Module Overview The Triconex 7400165-280 TMR Digital Input Module provides ultra-reliable signal acquisition for safety-critical systems. This advanced module implements triple modular redundant architecture across all 32 input channels. Designed for maximum fault tolerance, the module ensures continuous operation...
- Choosing a selection results in a full page refresh.