Redundancy Fiber Optic Cable | 1756-RMC1

Allen-Bradley 1756-RMC1 Redundancy Fiber Optic Cable (1 Meter)

Key Features

• 1-meter (3.28 ft) LC-to-LC duplex fiber cable

• 1300nm wavelength for industrial networks

• Supports <1000MB/s data transmission

• Compatible with 1756-RM2/RM2K/RM2XT modules

• Bend-resistant design for tight installations

Technical Specifications

Length: 1 meter (3.28 feet)

Connector: LC duplex (male both ends)

Temp Range: 0°C to 60°C (32°F to 140°F)

Max Bend Radius: 30mm (1.2in)

Fiber Type: 50/125μm multimode OM2

Compatible Systems

Modules: 1756-RM2 (Standard) | 1756-RM2K (Enhanced) | 1756-RM2XT (Extreme Temp)

Chassis: All ControlLogix 1756 series

Network: ControlLogix Redundancy System

Installation Guide

1. Always remove protective caps before connection

2. Connect to bottom port in downward orientation

3. Use LC couplers to prevent sharp bends

4. Route away from high-traffic areas

5. Verify link status LEDs after installation

Safety Notes

• Do not exceed 30mm bend radius

• Avoid crushing or abrasion during installation

• Inspect connectors for dust/debris before use

• Replace if jacket shows signs of damage

Typical Applications

• Short-distance chassis-to-chassis links

• Cabinet-to-backpanel connections

• High-vibration environments

• Electrically noisy areas

• Hazardous location installations

Package Contents

• 1756-RMC1 fiber cable (1 unit)

• Protective end caps (2 pairs)

• Installation leaflet

Ordering Options

Alternative Lengths: 1756-RMC3 (3m) | 1756-RMC10 (10m)

Shipping: FedEx/UPS/DHL (2-day available)

Support: 24/7 redundancy system specialists