Bently Nevada 330903-16-23-10-01-00 NSv Proximity Probe

Bently Nevada 3300 NSv Proximity Probe Series Overview

• Precise Technical Specifications for 330903

  The 330903-16-23-10-01-00 operates with an Incremental Scale Factor (ISF) of 7.87 V/mm (200 mV/mil). It maintains this sensitivity across a linear range of 1.5 mm (60 mils). The system exhibits a Deviation from Straight Line (DSL) of less than ±0.06 mm (±2.3 mils). We recommend a standard gap setting of 1.0 mm (40 mils) for optimal performance.

• Mechanical and Electrical Configuration

  This specific configuration includes an unthreaded length of 160 mm and an overall case length of 230 mm. The total probe length measures 1.0 meter (39 inches). It features an M8x1 thread and utilizes a miniature coaxial ClickLoc connector with a connector protector. The probe case material is AISI 304 stainless steel, with a PPS tip material.

• Environmental and Frequency Response Data

  The 3300 NSv probe operates effectively in temperatures from -52°C to +177°C. It provides a frequency response of 0 to 10 kHz (+0, -3 dB typical) with up to 305 meters of field wiring. Users must observe the minimum bend radius of 25.4 mm for the cable to maintain signal integrity. The probe is designed to seal differential pressure using a Viton O-ring.

• Installation Guidelines for the 3300 NSv

  Install the probe using only finger tight torque, with a maximum of 0.56 N•m (5 in•lb). For the connector, we recommend a torque of 5.1 N•m (45 in•lb). The target surface should ideally have a minimum diameter of 13 mm. For shaft diameters smaller than this, you may need to adjust the gap to maintain the scale factor.

• System Interconnectivity and Field Wiring

  This 330903 probe is electrically compatible with previous 3300 RAM extension cables. For field wiring between the proximitor and monitor, we recommend a three-conductor shielded triad cable. You can achieve a maximum wiring length of 305 meters (1000 feet). The DC resistance from the probe's center conductor to the outer conductor measures 4.2 ± 0.5 ohms.

• Packaging and Shipping Information

  Your order includes one new and original Bently Nevada 330903-16-23-10-01-00 in factory-sealed packaging. We handle all orders with care to ensure the product arrives in perfect condition. We ship exclusively with premium carriers to guarantee fast and reliable delivery worldwide. We typically dispatch orders via FedEx, UPS, or DHL depending on your location and requirements.

Frequently Asked Questions (FAQ)

• Is this Bently Nevada 330903 probe a new original item?

  Yes, we supply this 3300 NSv probe as a brand new, original unit in its factory packaging. We source all our Bently Nevada products directly from authorized channels to ensure authenticity and reliability for your critical machinery protection systems.

• What is the delivery time for the 330903-16-23-10-01-00?

  We maintain a substantial inventory of 3300 NSv series probes. This allows us to process and ship your order within 5 days after receiving your payment and confirmation. We understand the need for timely replacements and work quickly to get your parts to you.

• Which shipping carriers do you typically use?

  We primarily use DHL, UPS, and FedEx for all domestic and international shipments. These carriers provide the tracking visibility and reliable transit times required for industrial parts. We will provide you with a tracking number as soon as your order ships.

• What is your return policy for this 330903 probe?

  We want you to be completely satisfied with your purchase. If you need to return the 3300 NSv probe, we accept returns within 30 days of delivery. The item must be in its original, unopened factory packaging to qualify for a refund.

• What is the correct torque for installing the probe?

  The recommended installation torque for the 330903 is finger tight only. You must not exceed the maximum rated torque of 0.56 N•m (5 in•lb) on the probe case to avoid damaging the sensor or the mounting thread. Always follow these specifications closely.

© 2026 NexAuto Technology Limited. All rights reserved. Original Source: https://www.nex-auto.com/ Contact: sales@nex-auto.com Phone: +86 153 9242 9628