Analog Output Module | IC695ALG728 GE Fanuc Emerson

IC695ALG728 Analog Output Module

Main Output Capabilities:

Voltage Output Options: 0 to +10 VDC, -10 to +10 VDC

Current Output Options: 0–20 mA, 4–20 mA

Resolution: 0–10 V: 14.9 bits, ±10 V: 15.9 bits, 0–20 mA: 15.9 bits, 4–20 mA: 15.6 bits

Enhanced HART Communication:

Supported Version: HART 5.0

Integrated HART Modems: 2

HART Devices per Modem: Up to 4

Analog Update Time: 8 ms (non-HART), 16 ms (with HART)

Full HART Update Cycle: 2 seconds with 2 devices

Electrical Requirements and Power:

Backplane Power: Up to 380 mA at 3.3 VDC

External Supply Voltage: 19.2 VDC to 30 VDC (24 VDC nominal)

Current Draw from External Supply: 190 mA typical, maximum 250 mA

Maximum Power Dissipation: 7.25 W

Performance and Accuracy:

Calibrated Accuracy: ±0.15% of full scale at 25°C; ±0.30% at 60°C

Output Settling Time: 2 ms for voltage; 23–70 ms for current (HART dependent)

Maximum Load Resistance: 850 Ohms

Output Protection: Tolerates -30 V for 60 seconds, +30 V for 1 hour (Current outputs)

Data and Configuration:

Data Format: Configurable as IEEE 32-bit floating point or 16-bit integer within a 32-bit word

Alarms & Limits: Configurable output bias, clamping limits, alarm thresholds, and alarm latching support

Error Handling: Advanced fault detection and diagnostics included