Tisuće OEM dijelova za automatizaciju na skladištu
Brza globalna dostava s pouzdanom logistikom
  • TQ402
  • TQ402-1
  • TQ402-2
1 3

TQ402 111-402-000-012-A1-B1-C070-D000-E100-F2-G097-H10

Velike narudžbe i brza dostava

Trenutni popust od 10% na zimske bankovne kreditne/debitne kartice, EMI i kreditne kartice

Brza i pouzdana dostava širom svijeta – spremno za slanje iz skladišta
Preostalo je samo 9 jedinica
  • Brza dostava
  • Pravila povrata
  • Najniža cijena
  • Centar za pomoć 24/7

O proizvodu

Vibro-Meter TQ402 Technical Specifications

Module Identification

  • Brand & Model: Vibro-Meter TQ402
  • Full Part Number: 111-402-000-012-A1-B1-C070-D000-E100-F2-G097-H10
  • Product Type: Vibration Monitoring and Protection Module
  • System Family: VM600/VB7000 Monitoring Systems

Electrical Specifications

  • Power Supply: 24 V DC (18-32 V DC range)
  • Power Consumption: 3.5 W maximum
  • Input Channels: 2 independent vibration monitoring channels
  • Sensor Input: ±5 V DC for proximity probes (8 mm standard)
  • Sensor Supply: -24 V DC @ 200 mA per channel
  • Analog Outputs: 4-20 mA per channel, 0-500 Ω load
  • Relay Outputs: 6 SPDT relays, 2 A @ 250 V AC resistive
  • Frequency Response: 0.5 to 10000 Hz (configurable)

Signal Processing Specifications

  • Measurement Range: 0-8000 μm/mil peak-to-peak (proportional to speed)
  • Accuracy: ±1% of full scale at 25°C
  • Linearity: ±0.5% of full scale
  • Sampling Rate: 51.2 kHz per channel
  • A/D Resolution: 16-bit
  • Dynamic Range: >80 dB
  • Gap Voltage: -10.0 V DC ±0.5 V (probe bias)

Communication & Interface

  • Communication Protocol: RS-485 Modbus RTU
  • Baud Rate: 9600 to 115200 bps configurable
  • Network Address: 1-247 settable
  • LED Indicators: Power, Channel OK, Alarm, Communication
  • Configuration: DIP switches and software configurable

Environmental Specifications

  • Operating Temperature: 0 to 60°C (32 to 140°F)
  • Storage Temperature: -40 to 85°C (-40 to 185°F)
  • Relative Humidity: 5% to 95% non-condensing
  • Vibration Resistance: 2 g, 10 to 500 Hz
  • Shock Resistance: 15 g, 11 ms half-sine
  • EMC Compliance: EN 61326-1, Industrial immunity

Physical Specifications

  • Dimensions: 95 × 115 × 45 mm (W × H × D)
  • Mounting: DIN rail (35 mm) or panel mounting
  • Weight: Approximately 0.5 kg (1.1 lb)
  • Enclosure Rating: IP20 (standard)
  • Terminations: Screw terminals, 0.2-2.5 mm² wire size

Configuration Options (Based on Part Number)

  • C070: Speed range 0-6000 RPM monitoring
  • D000: Standard alarm setpoints configuration
  • E100: 100 mm cable length standard
  • F2: RS-485 communication option
  • G097: IEC measurement units (metric)
  • H10: European market certification package

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner AutoNex Controls Limited: https://www.autonexcontrol.com/

© 2025 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/

  • Brze ponude: Brzo primite cijene i dostupnost od našeg posvećenog tima za korisničku podršku.
  • Dostava: Dostupna ubrzana, teretna i međunarodna dostava širom svijeta.
  • Jamstvo: NexAuto nudi 12-mjesečno jamstvo na sve dijelove kupljene kod nas, uz dodatno jamstvo proizvođača.
  • Povrati: Politika povrata u roku od 30 dana za neispravne ili neodgovarajuće dijelove, za vašu sigurnost.
  • Plaćanje: Fleksibilne opcije uključuju glavne kreditne kartice, PayPal i bankovne transfere.
  • Prilagođena kalibracija: Pošaljite svoje specifikacije, a mi ćemo se pobrinuti za ostalo s preciznošću.
 Pogledaj detalje proizvoda

Blog zapisi

Pogledaj sve blogove