Bently Nevada - 8 mm Proximity Probes 330103-06-15-05-02-05

Manufacturer: Bently Nevada

Product Model: 330103-06-15-05-02-05

Technical Specifications:

Thread Type: M10 x 1, without armor

Unthreaded Length: 60 mm

Overall Case Length: 150 mm

Total Cable Length: 0.5 meter (1.6 feet)

Connector Type: Miniature coaxial ClickLoc connector, standard cable

Agency Approvals: CSA, ATEX, IECEx

Material Details:

Probe Tip Material: Polyphenylene sulfide (PPS)

Probe Case Material: AISI 303 or 304 stainless steel

Seal Material: Viton® O-ring for reliable pressure sealing

Performance Data:

Linear Range: 2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils)

Recommended Gap Setting: -9 Vdc, approximately 1.27 mm (50 mils)

Nominal DC Resistance: 7.45 Ω ± 0.50 Ω for 1.0 meter probe length

Electrical Wiring:

Supports 0.2 to 1.5 mm² (16 to 24 AWG), with 3-conductor shielded triad cable recommended

Maximum distance from 3300 XL Proximitor Sensor to monitor: 305 meters (1,000 feet)

Mechanical Properties:

Probe Thread Engagement: Maximum 15 mm

Probe Weight: 323 g/m (11.4 oz)

Temperature Specifications:

Standard Probe Operating & Storage: -52°C to +177°C (-62°F to +350°F)

Extended Temperature Range: Probe Tip -52°C to +218°C (-62°F to +425°F); Cable & Connector -51°C to +260°C (-60°F to +500°F)

Exposing probe below -34°C (-30°F) may cause premature pressure seal failure

Humidity Resistance:

Less than 3% change in Average Scale Factor (ASF) when exposed to 93% humidity for 56 days (IEC standard 68 2 3)