GE Fanuc IC660ELB904 Network Adapter | Genius I/O Interface

GE Fanuc IC660ELB904 Genius I/O Network Adapter Interface Board

The IC660ELB904 is a Genius I/O Network Adapter Interface Board designed for industrial control system integration. 

Key Specifications

• Model Number: IC660ELB904
• Manufacturer: GE Fanuc (Emerson Automation)
• Product Type: Genius I/O Network Adapter Interface Board
• Primary Function: Interface between Genius I/O blocks and control networks
• Product Weight: 1.36 kg (3.0 lbs)
• AC Voltage Range: 93–132 V AC (115V AC nominal)
• DC Voltage Range: 105–132 V DC (125V DC nominal)
• Power Consumption: 8 Watts Control Power typical
• Frequency Range: 47–63 Hz for AC operation
• Isolation Rating: 1500 Volts block-to-block isolation
• Maximum Ripple: 10% of DC supply voltage

Communication & Network Features

• Network Protocol: Genius Local Area Network (LAN) protocol
• Data Transfer Rate: 153.6 kbps standard Genius bus speed
• Node Capacity: Supports up to 31 Genius devices per drop
• Communication Distance: Up to 7500 feet (2286 meters) with proper cabling
• Interface Type: Dual-port for daisy-chain network topology
• LED Indicators: Power, communication status, fault indicators
• Configuration: DIP switch address setting (0-31)
• Diagnostic Capabilities: Comprehensive network and device monitoring

Thermal & Environmental Ratings

• Operating Temperature: 0 to 60°C (32 to 140°F)
• Storage Temperature: -40 to 100°C (-40 to 212°F)
• Relative Humidity: 5% to 95% non-condensing
• Heat Dissipation: Up to 45.6 Watts with full 8-output load (2 Amps each)
• Typical Dissipation: 15-25 Watts under normal operating conditions
• Cooling Method: Natural convection, no fans required
• Altitude Rating: Up to 2000 meters (6562 feet) without derating
• Shelf Life: 1 year in original packaging at recommended conditions
• Ingress Protection: IP20 when installed in proper enclosure

Physical Specifications

• Dimensions: Approximately 22.44 × 8.89 × 10.00 cm (8.83 × 3.50 × 3.94 in)
• Housing Material: Aluminum alloy for EMI protection and heat dissipation
• Mounting: DIN rail (35 mm) or panel mounting options
• Connector Types: Screw terminals for power and communication
• Communication Ports: Two Genius bus ports for daisy-chain connection
• Color: Standard industrial gray with status indicator window
• Terminal Type: Removable screw terminal blocks

Electrical Protection Features

• Isolation: 1500V between network side and I/O side
• Overvoltage Protection: Withstands transients up to 2000V peak
• Short Circuit Protection: Electronic current limiting on outputs
• Reverse Polarity Protection: Protected against incorrect DC connections
• ESD Protection: ±8 kV contact discharge per IEC 61000-4-2
• Surge Protection: ±1 kV line-to-line per IEC 61000-4-5
• Safety Certifications: UL 508, CSA 22.2 No. 142, CE marked

Performance Characteristics

• Response Time: < 10 ms typical for I/O updates
• Network Update Rate: Configurable 10-100 ms scan times
• Data Integrity: CRC error checking and automatic retry
• Noise Immunity: > 1500 V/μs common mode rejection
• Reliability: MTBF > 250,000 hours per MIL-HDBK-217F
• Diagnostic Coverage: Comprehensive network and device status monitoring

Installation & Configuration

• Mounting Options: 35 mm DIN rail or direct panel mounting
• Wiring Requirements: Use 18-14 AWG (0.75-2.5 mm²) wire
• Terminal Torque: 0.5-0.6 Nm (4.4-5.3 lb-in) for screw terminals
• Address Setting: 5-position DIP switch for node address (0-31)
• Network Topology: Daisy-chain configuration recommended
• System Compatibility: GE Series 90-30/90-70 PLCs and compatible systems
• Configuration Software: GE Fanuc configuration tools required

Package & Shipping

• Package Contents: IC660ELB904 interface board, installation guide
• Shipping: Available via FedEx, UPS, DHL with tracking
• Lead Time: Typically ships within 3-7 business days
• Storage Recommendation: Store in original packaging at controlled conditions
• Warranty: Standard manufacturer warranty applies

Frequently Asked Questions

• What is the maximum network length? Up to 7500 feet (2286 meters) with proper cabling.
• How many devices can connect to one adapter? Up to 31 Genius I/O devices per network drop.
• Is this a standalone unit or part of a system? It serves as the interface between Genius I/O blocks and the control system.

For network design and configuration support for the IC660ELB904 network adapter, contact our technical team.

Contact Information:
Email: sales@nex-auto.com
Phone/WhatsApp: +86 153 9242 9628

Partner: AutoNex Controls Limited

© 2025 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/