IC695ALG112 GE Fanuc Emerson | Analog Input Module

GE Fanuc IC695ALG112

Key Functional Overview

Module Type: Analog Input

Series: RX3i PACSystem

Part Number: IC695ALG112

Input Channels: 12 Single-ended

Input Types: Voltage (±10V, ±5V, 0–10V, 0–5V, 1–5V) and Current (0–20mA, 4–20mA, ±20mA)

Enhanced Performance Features

Resolution: 16-bit ADC with configurable Floating Point or Integer format

Settling Time: 0.1% of final value within 1.7 ms (depending on filter setting)

Digital Filters: 8 Hz (127 ms), 12 Hz (67 ms), 16 Hz (56 ms), 40 Hz (21 ms), 250 Hz (3.1 ms), 1000 Hz (0 ms)

Input Impedance: Greater than 500 kΩ

Overvoltage Protection: Up to ±35 VDC continuous

Overcurrent Protection: Up to ±35 mA continuous

Open Circuit Detection: Detects within 1 second

Electrical and Environmental Ratings

Power Consumption: Maximum 4.89 watts with all 12 channels active at 20mA

Voltage Supply: 3.3V / 5V with 600 / 800 mA draw

Thermal Derating: None

Calibrated Accuracy: ±0.1% at 25°C; ±0.2% over full temp range; ±2.0% under strong RF interference

Calibration Interval: Every 12 months recommended

Additional Module Capabilities

Supports IEEE 32-bit floating-point or 16-bit integer data format

Software-configurable filtering with no need for jumpers

Startup and runtime diagnostics with predictive capabilities

Supports firmware updates through flash memory

Detailed Model Breakdown

IC695ALG112-A: Standard firmware release with basic filter configuration

IC695ALG112-B: Enhanced firmware, added flash memory support