2090-CNSRPSS-AA05 Allen-Bradley Servo Cable 5m Network

2090-CNSRPSS-AA05 Allen-Bradley Kinetix 6000M Network Cable

Technical Specifications

• Brand: Allen-Bradley
• Model: 2090-CNSRPSS-AA05
• Series: Kinetix 6000M
• Category: Network Communication Cable
• Cable Length: 5 meters (16.4 feet)
• Wire Size: 22 AWG
• Cable Diameter: 7.75 mm (0.30 in.)
• Connector Type: Right-angle male to straight female
• Bend Radius: 93.0 mm (3.6 in.)
• Connector Torque: 0.8 to 1.2 N·m (7 to 11 lb·in)
• Operating Temperature: 80°C (176°F)
• Shielding: Overall tinned copper braid with aluminum/polyester tape
• Jacket Material: Industrial-grade purple TPE
• Environmental Rating: Oil-resistant and water-resistant
• Compliance: NFPA 79, UL PLTC-ER, CSA AWM, VW-1 flame rate

Frequently Asked Questions

• Can I connect this cable directly to an IPIM module?
  No. The right-angle connector on the 2090-CNSRPSS-AA05 does not fit at the IPIM module. Only straight pin connectors work properly at that location.
• What is the maximum network length for Kinetix 6000M?
  The maximum combined cable length reaches 100 meters (328 ft) from the IPIM module to the last IDM unit.
• Is this cable shielded against interference?
  Yes. Twisted wire-pairs with overall tinned copper braid and foil provide excellent noise rejection for encoder signals.
• What wire gauge does the 2090-CNSRPSS-AA05 use?
  This cable uses 22 AWG wire for dependable signal transmission across the daisy-chain network.
• Does this cable resist oil and water?
  Yes. The industrial TPE jacket provides oil resistance and water resistance for demanding environments.

© 2026 NexAuto Technology Limited. All rights reserved.