2090-CNSSPRS-AA09 Allen-Bradley Cable

Allen-Bradley 2090-CNSSPRS-AA09 Network Cable – Kinetix 6000M System Connectivity

Technical Specifications

• Brand: Allen-Bradley
• Model: 2090-CNSSPRS-AA09
• Category: Network Cable / Kinetix 6000M Communication Cable
• Cable Length: 9 meters (29.5 ft)
• Connector Configuration: Upstream straight pin (SP) to downstream right-angle socket (RS)
• Wire Type: Shielded twisted-pair for transmit and receive signals
• Temperature Range: -20°C to +80°C
• Environmental Resistance: Oil-resistant and flame-retardant jacket construction
• Noise Immunity: Overall shield bonded to connector housing for excellent EMI/RFI protection
• Minimum Bend Radius: 7 times the cable diameter (static installation)

Installation Guide

• Disconnect power from the IPIM module before making any network connections.
• Verify the upstream straight pin connector faces the IPIM module, not the IDM unit.
• Route the cable away from high-voltage power lines to minimize electromagnetic interference.
• Maintain a minimum bend radius of seven times the cable diameter during installation.
• Provide cable supports at 3-meter intervals along the cable run to reduce connector stress.
• Apply 0.8 to 1.2 N·m torque to fully seat each connector and secure the connection.

Package List

• 1 x Allen-Bradley 2090-CNSSPRS-AA09 Network Cable
• 1 x Protective dust cap on each connector end
• 1 x Anti-static shielding bag

Shipping & Support

• We ship within 5 days after order confirmation.
• We use FedEx, UPS, and DHL for worldwide delivery.
• We accept returns within 30 days of delivery.
• All products are brand new and original from our ready stock.

Frequently Asked Questions

• Q: What is the maximum total cable length for one IPIM module?
  A: The combined cable length from one IPIM to the last IDM unit must not exceed 100 meters (328 ft).
• Q: Can I use this cable for other Kinetix drive systems?
  A: No, this cable is specifically designed for the Kinetix 6000M integrated drive-motor network architecture.
• Q: How do I straighten the cable if it arrives coiled?
  A: Hang the cable from its midpoint or lay it flat on the floor. Any coiling relaxes within 24 hours.
• Q: Does the 2090-CNSSPRS-AA09 require a terminator on the last IDM unit?
  A: Yes, the final IDM unit requires a 2090-CTSRP network terminator, included with each IPIM module.
• Q: Can I return the cable if it does not fit my setup?
  A: Yes, we offer a 30-day return policy for unused products in original packaging.

© 2026 NexAuto Technology Limited. All rights reserved.
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628 (WhatsApp)