2090-CNSSPSS-AA20 Allen-Bradley Network Cable | Kinetix 6000M

2090-CNSSPSS-AA20 Allen-Bradley Network Cable — 20 Meter Kinetix 6000M Connection

Technical Specifications

• Brand: Allen-Bradley
• Model: 2090-CNSSPSS-AA20
• Series: Kinetix 6000M
• Category: Network Cable / Servo Communication Cable
• Cable Length: 20 m (65.6 ft)
• Wire Size: 22 AWG twisted pair
• Cable Diameter: 7.75 mm (0.30 in.)
• Connector Type: M12 straight male (pin) to M12 straight female (socket)
• Bend Radius: 93.0 mm (3.6 in.) static minimum
• Temperature Range: Industrial operating range suitable for cabinet and machine environments
• Interference Immunity: Overall shield bonds to connector housing for EMI protection
• Maximum System Length: 100 m (328 ft) between IPIM and last IDM unit

Installation Guide

• Disconnect power to the IPIM module and verify DC bus voltage is below 50V before wiring.
• Use the straight pin connector for IPIM module connections only; right-angle variants will not fit.
• Maintain a static bend radius of at least 12 times the cable diameter during routing.
• Keep the cable from flexing within 150 mm of each connector installation area.
• Provide cable supports at 3 m intervals to reduce tension at connectors.
• Torque connector plugs to 0.8 to 1.2 N·m (7 to 11 lb·in) to seat contacts fully.

Package List

• 1 x Allen-Bradley 2090-CNSSPSS-AA20 network cable
• 1 x Anti-static protective bag
• 1 x Cable tie set
• 1 x Installation reference card

Shipping & Support

• We ship via FedEx, UPS, and DHL to match your delivery timeline.
• Our team keeps this cable in stock for immediate order processing.
• We dispatch most orders within 5 business days after payment clears.
• You may return the product within 30 days if it does not meet your needs.
• Every unit we sell is brand new and original from Allen-Bradley.

FAQ

• Q: What is the maximum cable length for a Kinetix 6000M daisy chain?
  A: The total cabling between the IPIM and the last IDM unit must not exceed 100 m (328 ft).
• Q: Can I connect this cable directly to an IPIM module?
  A: Yes, the straight pin connector on the 2090-CNSSPSS-AA20 fits IPIM module ports.
• Q: What torque should I use when tightening the connectors?
  A: Apply 0.8 to 1.2 N·m (7 to 11 lb·in) to fully seat the contacts.
• Q: How many extension cables can I use between IDM units?
  A: A maximum of two extension cables may connect between an IDM unit and the preceding module or unit.
• Q: Is this cable shielded against electrical noise?
  A: Yes, the overall shield bonds to the threaded metal end of both connectors for EMI protection.
• Q: What wire gauge does this network cable use?
  A: It uses 22 AWG twisted wire-pairs for signal transmission.
• Q: Can I use this cable outdoors?
  A: We recommend indoor use within a cabinet or machine enclosure for best performance.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
phone +86 153 9242 9628