2090-CNSSPSS-AAP5 Servo Cable Allen-Bradley 2090 Series

Allen-Bradley 2090-CNSSPSS-AAP5 Servo Cable – Reliable Motion Control Connection

Technical Specifications

• Brand: Allen-Bradley
• Model: 2090-CNSSPSS-AAP5
• Category: Servo Cable / Motion Control Cable
• Measurement Range: Not applicable (passive cable, no measurement range)
• Frequency Response: Supports high-frequency servo drive signals up to 1 MHz
• Sensitivity: Low signal attenuation for accurate feedback
• Linearity: Stable impedance across the cable length
• Resolution: Maintains encoder resolution without data loss
• Temperature Range: -20°C to +80°C for flexible operation
• Environmental Resistance: Oil-resistant, UV-resistant, and flame-retardant jacket
• Immunity: Shielded construction fights EMI and crosstalk

Installation Guide

• Verify the cable length and connector type before starting any work.
• Route the cable away from high-voltage power lines to reduce noise.
• Use proper strain relief at both the drive and motor ends.
• Avoid sharp bends; respect the minimum bend radius from the datasheet.
• Check pin assignments carefully before plugging into the servo drive.
• Tighten connectors by hand, then use a torque wrench if required.

Package List

• 1 x Allen-Bradley 2090-CNSSPSS-AAP5 Servo Cable
• 1 x Protective dust cap set
• 1 x Installation instruction sheet

Shipping & Support

• We ship via FedEx, UPS, and DHL for fast worldwide delivery.
• Most orders leave our warehouse within 5 business days.
• We accept returns within 30 days for eligible items.
• All products are brand new and original.

Frequently Asked Questions

• Q: What is the maximum operating temperature for this cable?
  A: The 2090-CNSSPSS-AAP5 works reliably from -20°C to +80°C.
• Q: Does this servo cable support high-resolution encoders?
  A: Yes, its low-capacitance design preserves encoder resolution without signal loss.
• Q: How does the cable resist electrical interference?
  A: A foil and braid shield blocks EMI and crosstalk in noisy factory settings.
• Q: Can I use this cable with other Allen-Bradley servo drives?
  A: It works with many 2090 series drives; check your drive manual for compatibility.
• Q: What is the minimum bend radius during installation?
  A: Follow the datasheet; typically 5 times the cable diameter for fixed runs.
• Q: Is this cable oil-resistant?
  A: Yes, the jacket resists oil, UV light, and flame for long service life.
• Q: How fast do you ship orders?
  A: We dispatch within 5 days using FedEx, UPS, or DHL.
• Q: What is your return policy?
  A: We accept returns within 30 days for unused, original-condition products.

© 2026 NexAuto Technology Limited. All rights reserved. Original Source: https://www.nex-auto.com/ Contact: sales@nex-auto.com Phone: +86 153 9242 9628