330104-00-07-05-01-05 Bently Nevada 3300 XL 8mm Probe

330104-00-07-05-01-05 Bently Nevada 3300 XL 8 mm Proximity Probe

Key Technical Specifications

• Brand & Model: Bently Nevada 330104-00-07-05-01-05, part of the 3300 XL 8 mm Proximity Probes, Metric series.
• Linear Range: 2 mm (80 mils), starting from 0.25 mm (10 mils) up to 2.3 mm (90 mils). Output range equals approximately –1 to –17 Vdc.
• Recommended Gap Setting: -9 Vdc for radial vibration, which equals roughly 1.27 mm (50 mils).
• Probe Tip Material: Polyphenylene sulfide (PPS) offers excellent durability and chemical resistance.
• Probe Case Material: AISI 303 or 304 stainless steel (SST) provides strong mechanical protection.
• Thread Type: M10 x 1 thread with a maximum engagement length of 15 mm.
• Probe Case Torque: Maximum rated torque equals 33.9 N•m (300 in•lbf). Recommended installation torque is 11.2 N•m (100 in•lbf).
• Nominal DC Resistance: For 0.5 meter length, RPROBE equals 7.45 ± 0.50 Ω from center to outer conductor.
• Operating Temperature (Standard Probe): Ranges from -52°C to +177°C (-62°F to +350°F).
• Extended Temperature Tip: Withstands -52°C to +218°C (-62°F to +425°F); cable handles -51°C to +260°C (-60°F to +500°F).
• Pressure Seal: Uses a Viton® O-ring to seal differential pressure between tip and case.
• Humidity Tolerance: Less than 3% change in Average Scale Factor (ASF) after 56 days at 93% humidity per IEC 68-2-3.
• Agency Approvals: CSA, ATEX, IECEx for safe use in hazardous locations.
• Connector Type: Miniature coaxial ClickLoc connector with connector protector, using standard cable.
• Total Length: 0.5 meter (1.6 feet) for short-range installations.
• Unthreaded Length: 0mm; Overall Case Length: 70mm.

Frequently Asked Questions (FAQ)

• Q: Is this 330104-00-07-05-01-05 a genuine Bently Nevada part?
  A: Yes, it is a brand new, original 3300 XL series probe with full factory specifications.
• Q: What is the recommended torque for installing this probe?
  A: Bently Nevada recommends 11.2 N•m (100 in•lbf). Do not exceed the maximum rating of 33.9 N•m (300 in•lbf).
• Q: Does this probe have ATEX or CSA certification?
  A: Yes, this configuration includes CSA, ATEX, and IECEx approvals (Agency Approval Option 05).
• Q: What happens if my operating temperature drops below -34°C?
  A: The pressure seal may fail prematurely. Avoid exposing the probe to temperatures below -34°C (-30°F).
• Q: Do you test the pressure seal before shipping?
  A: Bently Nevada does not pressure test each probe. Contact their custom design department if you need a test.
• Q: How long will delivery take?
  A: We ship within 5 days via FedEx, UPS, or DHL. Typical transit times range from 3 to 7 business days.
• Q: What is the return policy for this probe?
  A: We accept returns within 30 days from delivery, provided the item remains unused and in original condition.
• Q: Can I use this 0.5m probe with any Proximitor sensor?
  A: Yes, the 0.5 meter length works with standard Proximitor sensors. No special length restriction applies here.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628 (Click to chat on WhatsApp)