330709-000-070-50-02-00 3300 XL Proximity Probe 5m Bently Nevada

3300 XL 11 mm Proximity Probes – Model 330709-000-070-50-02-00

Key Technical Specifications

• Brand & Model: Bently Nevada 330709-000-070-50-02-00 (3300 XL 11 mm Probe).
• Unthreaded Length: 00 mm (standard configuration).
• Overall Case Length: 70 mm for flexible mounting options.
• Total Length Option: 5.0 meters (16.4 feet) with standard coaxial ClickLoc connector.
• Important Note: The 5 meter probe works only with the 5 meter Proximitor Sensor.
• Connector Type: Miniature coaxial ClickLoc connector with standard cable.
• Agency Approval Option: 00 (not required for this configuration).
• Probe Tip Material: Polyphenylene sulfide (PPS) for excellent chemical resistance.
• Probe Case Material: AISI 304 stainless steel (SST) for maximum durability.
• Cable Specification: 75 Ω triaxial with fluoroethylene propylene (FEP) insulation.
• Probe DC Resistance (RPROBE): 7.2 ± 0.8 Ω for the 5.0 meter length.
• Probe Case Thread: M16 x 1.5 with maximum thread engagement of 24 mm.
• Operating Temperature Range: -52°C to +177°C (-62°F to +351°F).

Installation & Mechanical Requirements

• Recommended Probe Case Torque: Apply 21.1 N•m (187 in•lb) for M16x1.5 probe cases.
• Maximum Probe Case Torque: Never exceed 63.3 N•m (560 in•lb) to avoid thread damage.
• Connector-to-Connector Torque: Finger tight only. Maximum torque is 0.565 N•m (5 in•lb).
• Minimum Bend Radius: 25.4 mm (1.0 inch) with or without SST armor.
• Recommended Target Size: Minimum flat surface diameter of 30.5 mm (1.2 inches).
• Recommended Shaft Diameter: Minimum shaft diameter of 152 mm (6.0 inches).
• Low Temperature Caution: Exposure below -34°C (-30°F) may cause premature pressure seal failure.

Frequently Asked Questions (FAQ)

• Q: Is the 330709-000-070-50-02-00 a brand new original part?
  A: Yes, we supply only brand new, original Bently Nevada 3300 XL series probes.
• Q: Can I use this 5 meter probe with any Proximitor Sensor?
  A: No, the 5 meter probe works only with the 5 meter Proximitor Sensor.
• Q: Do you have this probe in stock?
  A: Yes, we maintain stock for this 330709-000-070-50-02-00 model and can ship quickly.
• Q: How long for delivery after ordering?
  A: We will process and ship your order within 5 days using FedEx, UPS, or DHL.
• Q: Can I return the probe if it does not fit my application?
  A: Yes, we accept returns within 30 days from delivery for any reason.
• Q: What is the minimum shaft diameter for this probe?
  A: The recommended minimum shaft diameter is 152 mm (6.0 inches).
• Q: What is the minimum bend radius for the cable?
  A: The minimum bend radius is 25.4 mm (1.0 inch) with or without armor.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628