9200-09-01-02-00 Bently Nevada Two-Wire Velocity Transducer

Bently Nevada 9200-09-01-02-00 Two-Wire Velocity Seismoprobe Transducer

• Manufacturer & Model: Bently Nevada, 9200-09-01-02-00 (Two-Wire Velocity Seismoprobe).
• Sensitivity: 20 mV/mm/s (500 mV/in/s) ±5% at 10 kΩ load, calibrated at reference angle.
• Frequency Response: Minimum operating frequency 15 Hz (900 cpm) with mounting angle option 0 ±180°.
• Dynamic Range: Maximum displacement 2.54 mm (0.100 in) peak-to-peak; velocity range 25 mm/s (1 in/s) at 100 Hz.
• Electrical Parameters: Coil resistance 1.25 kΩ ±5%; locked coil inductance 125 mH (typical).
• Temperature Range: Operating/storage -29°C to +121°C (-20°F to +250°F) for the 9200 series.
• Environmental Protection: Dust and moisture resistant; handles 95% RH (noncondensing) and 100% RH (non-submerged with integral cable).
• Housing & Dimensions: Anodized aluminum A204 case, height 102 mm (4 in), diameter 41 mm (1.6 in), weight 300 g (10.5 oz).
• Mounting & Connections: Circular base with 1/4-28 UNF stud; top-mount connector (no cable included).
• Agency Approvals: Option 00 = no approvals required; also available with hazardous area certifications (cNRTLus, ATEX/IECEx).

Installation Guidelines

• Mount the transducer at the specified angle (0 ±180°) to achieve the rated sensitivity.
• Secure the circular base using the 1/4-28 UNF stud – torque to manufacturer recommendations.
• Connect the output across pins "A" and "B" with a 10 kΩ load for proper termination.
• Ensure the mounting surface is clean and flat to avoid measurement errors.
• For high-temperature applications (>121°C), consider the 74712 option (up to 204°C).
• Route cables away from high-interference sources to maintain signal integrity.

Package Contents

• 1 x Bently Nevada 9200-09-01-02-00 velocity seismoprobe transducer.
• 1 x Mounting stud (1/4-28 UNF) pre-installed on the circular base.
• 1 x Calibration certificate (factory issued).
• 1 x Installation and wiring quick-guide.

Shipping & Returns

• Shipping: We dispatch via FedEx, UPS, or DHL – you select the carrier at checkout.
• Dispatch Time: All orders leave our warehouse within 5 business days.
• Returns: We accept returns within 30 days of delivery (subject to conditions).

Frequently Asked Questions (FAQ)

• Q: Is this a brand new, original Bently Nevada unit?
  A: Yes, we supply 100% new and original 9200-09-01-02-00 seismoprobes in factory-sealed packaging.
• Q: What is the sensitivity temperature coefficient?
  A: The sensitivity changes by 0.2% per °C – factor this in for wide-temperature applications.
• Q: Can I use this transducer in a hazardous area?
  A: The base model (option 00) has no approvals, but Bently Nevada offers certified versions (cNRTLus, ATEX/IECEx) – please inquire.
• Q: Does the transducer come with a cable?
  A: No, connector option 01 is top-mount without cable – you supply your own shielded wiring.
• Q: What is the maximum velocity this unit can measure?
  A: It measures up to 25 mm/s (1 in/s) at +22°C casing vibration at 100 Hz with a 10 kΩ load.
• Q: Do you have stock available?
  A: Yes, we keep the Bently Nevada 9200 series in stock. Contact us for current quantities.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | +86 153 9242 9628