A02B-0120-C051 FANUC - Operator Panel

Key Technical Specifications

• Brand: FANUC
• Model: A02B-0120-C051
• Series: FANUC Series 16/18 CNC
• Category: CRT/MDI operator interface unit
• Display: 9-inch monochrome CRT
• Input: Integrated MDI keyboard unit
• Design: Operator panel with display and keyboard combined, no separate monitor
• Communication: No built-in communication ports; the unit works as a passive component
• Supply voltage: Not published by FANUC for this order code
• Weight: Approximately 2.13 kg (supplier-reported figure, single source)

Environmental and Operating Limits

• Operating temperature: 0 to 55 °C (family-level reference, not confirmed for this specific order code)
• Storage and transport temperature: −20 to 60 °C (family-level reference)
• Relative humidity: 75%RH or less, with no condensation
• Temperature reference source: GFZ-63003EN/04 documentation for the 16i-A family
• Note: Treat these figures as guidance until FANUC confirms them for your exact order code

Installation Guide

• Record the existing parameter and ladder backup before you remove the old panel
• Power down the CNC and lock out the main disconnect before you start
• Label each cable connector so reassembly stays straightforward
• Mount the new unit in the same cutout and torque the fasteners evenly
• Reconnect the video and keyboard cables and confirm each connector seats fully
• Power up the control and check the display, keys, and axis feedback response
• Confirm the suffix variant matches your control type before you place the order

Packing List

• One A02B-0120-C051 CRT/MDI operator interface unit
• Protective packaging for the CRT glass and keyboard surface
• Anti-static bag and foam cushioning
• Shipment through FedEx, UPS, or DHL

FAQ

Does this panel fit both Series 16 and Series 18 controls?

• Yes, FANUC lists this unit for both families, but the suffix variant defines the exact control type.
• Check for /MA or /MAS in your order code and confirm it with FANUC documentation.

What is the operating temperature range?

• FANUC family references show 0 to 55 °C for operation and −20 to 60 °C for storage.
• Confirm these limits against your control documentation before you deploy the unit.

Does the unit include communication ports?

• No, this panel works as a passive component with no built-in communication ports.
• The CNC control handles all data exchange through its own interfaces.

How much does the panel weigh?

• A single supplier lists the weight at about 2.13 kg (4.69 lbs).
• Plan your mounting and shipping accordingly, since FANUC publishes no official figure.

Is this a current production product?

• No, this is a legacy CRT/MDI-era panel, and current FANUC generations use LCD and iHMI panels.
• We stock this item as new original stock, so availability stays strong for legacy repairs.

What are your shipping and return terms?

• We keep this item in stock and ship within 5 days through DHL and similar carriers.
• We accept returns within 30 days, and every unit ships as new original stock.