Allen-Bradley 2090-CNSSPRS-AA12 Network Cable 12M

Allen-Bradley 2090-CNSSPRS-AA12 Network Cable – Kinetix 6000M System Connectivity

Technical Specifications

• Brand: Allen-Bradley
• Model: 2090-CNSSPRS-AA12
• Category: Network Cable / Kinetix 6000M Communication Cable
• Cable Length: 12 meters (39.3 ft)
• Connector Configuration: Straight pin (SP) upstream to right-angle socket (RS) downstream
• Wire Size: 22 AWG twisted-pair construction
• Cable Diameter: 7.75 mm (0.30 in.) nominal
• Bend Radius: 93.0 mm (3.6 in.) static installation minimum
• Connector Install Torque: 0.8 to 1.2 N·m (7 to 11 lb·in)
• Temperature Range: -20°C to +80°C
• Environmental Resistance: Oil-resistant and flame-retardant jacket with overall shielding
• Noise Immunity: Shield bonded to connector housing for excellent EMI/RFI protection
• Maximum Network Length: 100 meters (328 ft) total daisy-chain

Installation Guide

• Mount the IDM unit before connecting any network cable to prevent connector stress.
• Only a straight pin connector fits the IPIM module; right-angle pin connectors will not work.
• Maintain a minimum bend radius of 7 times the cable diameter during installation.
• Provide cable supports at 3-meter intervals along the cable run to reduce tension.
• Apply 0.8 to 1.2 N·m of torque to fully seat the M12 connector contacts.
• Route cables away from high-voltage power lines to minimize electromagnetic interference.
• Install a 2090-CTSRP network terminator on the last IDM unit in the chain.

Package List

• 1 x Allen-Bradley 2090-CNSSPRS-AA12 Network Cable
• 1 x Protective dust cap on each connector end
• 1 x Anti-static shielding bag

Shipping & Support

• We ship within 5 days after order confirmation.
• We use FedEx, UPS, and DHL for worldwide delivery.
• We accept returns within 30 days of delivery.
• All products are brand new and original from our ready stock.

Frequently Asked Questions

• Q: What is the maximum total cable length for one IPIM module?
  A: The combined network length from the IPIM to the last IDM must not exceed 100 meters (328 ft).
• Q: Can I use the 2090-CNSSPRS-AA12 for other Kinetix drive systems?
  A: No, this cable is specifically designed for the Kinetix 6000M integrated drive-motor network architecture.
• Q: Does this cable require a terminator on the last IDM unit?
  A: Yes, the final IDM unit requires a 2090-CTSRP network terminator, which is included with each IPIM module.
• Q: How do I properly install the connector to avoid damage?
  A: Apply 0.8 to 1.2 N·m of torque and avoid bending the cable within 93 mm of the connector.
• Q: Can I return the cable if it does not fit my setup?
  A: Yes, we offer a 30-day return policy for unused products in original packaging.

© 2026 NexAuto Technology Limited. All rights reserved.
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628 (WhatsApp)