EDS-608 Moxa Modular Managed Industrial Ethernet Switch

EDS-608 Moxa Modular Managed Industrial Ethernet Switch

Hardware Overview

• Switch type: managed Layer 2 switch with a modular chassis layout.
• Form factor: DIN-rail mounting, with optional wall mounting for tight spaces.
• Ethernet ports: you configure them through expansion modules, up to 8 Fast Ethernet ports.
• Jumbo frame support reaches 9.6 KB for larger data payloads.

Switching Performance

• MAC table size: 8 K entries handle a busy industrial network.
• Packet buffer: 1 Mbits absorbs short traffic bursts without drops.
• MTBF: 596,219 hrs under Telcordia GB standards, a strong reliability figure.
• Moxa does not publish switching capacity in the official datasheet.

Protocols and Redundancy

• Supported standards include IEEE 802.3, 802.3u, 802.3x, 802.1D, 802.1w, 802.1Q, 802.1p and 802.3ad.
• Industrial protocols cover EtherNet/IP, Modbus TCP and PROFINET transparent traffic.
• Redundancy options: Turbo Ring v1/v2, Turbo Chain, RSTP, MSTP, STP and Link Aggregation.
• Management runs through Web, CLI, Telnet, serial console and MIB access.
• You also get bandwidth management, port mirroring and auto warning by relay and email.

Electrical Specifications

• Supply voltage: 12/24/48 VDC with redundant dual inputs.
• Input current: 1.5 A max. at 12 VDC with the maximum number of modules installed.
• Power consumption: 18 W max. at 12 VDC under the same full-module condition.

Environmental and Mechanical Data

• Operating temperature: 0 to 60 °C; storage temperature: -40 to 85 °C.
• Relative humidity: 5 to 95%, non-condensing.
• Protection rating: IP30.
• Dimensions (H×W×D): 151 × 125 × 157.4 mm; weight: 1.95 kg.
• The datasheet does not specify housing material for the enclosure.
• Lifecycle status: mature, last verified in 2026-09.

Installation Guide

• Mount the chassis on a DIN rail, or use the optional wall-mount kit.
• Slide the interface modules into the chassis and secure them before power-up.
• Wire both DC inputs to separate sources for redundant power protection.
• Keep cabinet airflow open around the unit, and respect the 0 to 60 °C range.
• Set Turbo Ring or RSTP after cabling, then confirm status through the Web interface.

Packing List

• 1 × EDS-608 modular managed switch chassis.
• Interface modules as ordered (sold by configuration).
• DIN-rail mounting kit and terminal block accessories.
• Printed quick installation guide.
• Shipment by FedEx, UPS or DHL.

FAQ

• Q: Is the EDS-608 new and original?
  A: Yes, every unit is brand new and original from Moxa.
• Q: Do you keep stock?
  A: Yes, we hold stock and ship within 5 days.
• Q: Which carriers do you use?
  A: We ship by DHL, FedEx and UPS.
• Q: Can I return the switch?
  A: Yes, we accept returns within 30 days.
• Q: How many ports can I configure?
  A: You can reach up to 8 Fast Ethernet ports with expansion modules.
• Q: Does it support ring redundancy?
  A: Yes, it runs Turbo Ring v1/v2, Turbo Chain, RSTP, MSTP and STP.
• Q: What power input does it accept?
  A: It takes 12/24/48 VDC through redundant dual inputs.
• Q: What is the operating temperature range?
  A: The switch works from 0 to 60 °C.