S30A-6011DA SICK Safety Laser Scanner S3000 Professional

SICK S30A-6011DA Safety Laser Scanner – S3000 Professional Series

Key Technical Specifications

• Brand: SICK
• Model: S30A-6011DA
• Series: S3000 Professional
• Type: Safety Laser Scanner
• Measuring Range: 19 m
• Resolution: 30 mm
• Response Time: 60 ms (depending on basic response time and multiple sampling)
• Operating Voltage: 24 V (range: 16.8 to 28.8 V)
• Output Type: 2 PNP semiconductors, short-circuit protected, cross-circuit monitored
• Connection Type: System plug with or without connecting cable (Male Conn M12 5Pin)
• Housing Material: Aluminum die cast
• IP Rating: IP65
• Shock Resistance: 16 g, 16 ms (IEC 60068-2-29)
• Weight: 3.3 kg

Performance and Flexibility Highlights

• The scanner supports up to eight configurable protective and warning fields for complex protection zones.
• Triple field mode and simultaneous monitoring of up to four protective fields work with SICK safety controllers.
• Incremental encoder inputs enable speed-dependent field switching for automated guided vehicles.
• The integrated EFI interface extends interoperability with other SICK safety laser scanners and safety controllers.
• Measured data output via RS-422 supports diagnostics and system integration.
• The system plug includes a configuration memory for quick device replacement without a laptop.

Installation Guide

• Mount the scanner on a rigid surface using the aluminum die-cast housing mounting points.
• Connect the M12 5-pin male connector to the system plug and route the cable away from moving parts.
• Verify the supply voltage stays within 16.8 to 28.8 V before powering the device.
• Configure protective and warning fields through the SICK configuration software or the system plug memory.
• Test the response time and field switching logic under actual operating conditions.
• Confirm the IP65 seal remains intact after installation in dusty or wet environments.

Packing List

• 1 × SICK S30A-6011DA Safety Laser Scanner
• 1 × System plug (with or without connecting cable, depending on order configuration)
• 1 × M12 5-pin male connector
• 1 × Quick start guide
• 1 × Protective packaging

Shipping and Support

• We ship via FedEx, UPS, and DHL to worldwide destinations.
• We dispatch in-stock items within 5 business days after order confirmation.
• We support returns within 30 days under our standard return policy.
• All units are brand new and original.

FAQ

• Q: What is the measuring range of the S30A-6011DA?
  A: The S30A-6011DA covers 0 m to 19 m. You can set protective fields at 4 m, 5.5 m, or 7 m depending on configuration.
• Q: Does this scanner support speed-dependent field switching?
  A: Yes. The incremental encoder inputs let you switch fields based on vehicle speed. This feature suits automated guided vehicles.
• Q: How many protective fields can the scanner monitor at once?
  A: It can monitor up to four protective fields simultaneously when paired with a SICK safety controller.
• Q: What is the response time?
  A: The response time is 60 ms, depending on the basic response time and multiple sampling settings.
• Q: What connection does the device use?
  A: The scanner uses a system plug with an M12 5-pin male connector. You can order it with or without a connecting cable.
• Q: Is the scanner suitable for dusty or wet areas?
  A: Yes. The aluminum die-cast housing carries an IP65 rating. It resists dust and water jets.
• Q: Can I replace the device without a laptop?
  A: Yes. The system plug contains the configuration memory. You simply move the plug to the replacement unit.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com
Phone: +86 153 9242 9628