SJ-E132L Keyence Ionizer Small-Flow Static Bar

Keyence SJ-E132L Small-Flow Bar-Type Static Eliminator

Technical Specifications

• Brand: Keyence
• Model: SJ-E132L
• Series: SJ-E series
• Product type: Bar-type static eliminator (small-flow model)
• Ion generation: Corona discharge with shockless resistive coupling
• Voltage application: Pulse AC method at ±8000 V
• Ion balance control: Hi-Power I.C.C. method
• Ion balance: ±30 V at 300 mm or more with 0.2 MPa air pressure
• Installation distance: 50 to 2000 mm
• Number of electrodes: 21
• Effective length: 1400 mm at 50 mm distance
• Total length: 1280 mm
• Supply voltage: 24 to 36 VDC ±10%
• Current consumption: 700 mA at 24 V, 500 mA at 36 V
• Control output: NPN open collector, 100 mA maximum (40 VDC or less)
• Control input: Static elimination stop input (NPN open collector or contact point)
• Output type: NPN open collector (ion level warning, condition warning, alarm output)
• Air connection port: Rc 1/8
• Air supply pressure: 0.1 to 0.5 MPa (recommended 0.2 MPa)
• Operating temperature: 0 to +40 °C
• Relative humidity: 35 to 85 % RH, no condensation
• Overvoltage category: I
• Pollution degree: 2
• Protection rating: Not available
• Weight: 1.50 kg
• Electrode probe material: Tungsten
• Main body material: ABS, PBT, PP, LCP, PPS, SPS, SUS
• Communication: Remote control communication; no built-in ports or expansion

Performance and Environmental Resistance

• The SJ-E132L holds ion balance within ±30 V under recommended air pressure.
• The pulse AC method and Hi-Power I.C.C. control keep discharge stable across the working range.
• Tungsten electrode probes resist wear and support long service life.
• The housing combines ABS, PBT, PP, LCP, PPS, SPS and SUS for mechanical strength.
• The unit operates from 0 to +40 °C and tolerates 35 to 85 % RH without condensation.
• Overvoltage category I and pollution degree 2 suit controlled industrial environments.
• NPN open collector outputs report ion level warnings, condition warnings and alarms.

Installation Guide

• Mount the bar at a distance between 50 and 2000 mm from the target surface.
• Keep the 1400 mm effective length aligned with the charged area at 50 mm distance.
• Connect air to the Rc 1/8 port and set pressure between 0.1 and 0.5 MPa.
• Use 0.2 MPa recommended pressure to reach the specified ±30 V ion balance.
• Wire the 24 to 36 VDC supply and confirm current draw stays within 700 mA at 24 V.
• Connect the static elimination stop input using NPN open collector or a contact point.
• Route alarm and warning outputs to a controller rated for 40 VDC or less.
• Verify airflow and ion balance after mounting before full production starts.

Packing List

• 1 × Keyence SJ-E132L bar-type static eliminator
• 1 × Instruction sheet
• 1 × Air connection fitting set
• 1 × Mounting bracket set
• Shipping by FedEx, UPS or DHL

FAQ

• Q: What is the ion balance of the SJ-E132L?
  A: It reaches ±30 V at 300 mm or more with 0.2 MPa air pressure.
• Q: What installation distance does the bar support?
  A: Users can mount it from 50 to 2000 mm from the target.
• Q: How many electrodes does the unit have?
  A: It carries 21 tungsten electrode probes along the bar.
• Q: What supply voltage does the SJ-E132L need?
  A: It runs on 24 to 36 VDC ±10% with 700 mA draw at 24 V.
• Q: What air pressure should I set?
  A: Set 0.1 to 0.5 MPa; Keyence recommends 0.2 MPa for rated balance.
• Q: What is the operating temperature range?
  A: The unit works from 0 to +40 °C at 35 to 85 % RH without condensation.
• Q: Is the product new and in stock?
  A: We supply brand-new original units, and we keep stock available.
• Q: How fast do you ship, and which carriers do you use?
  A: We ship within 5 days by FedEx, UPS or DHL.
• Q: What is the return policy?
  A: We support returns within 30 days of delivery.