Dual Vibration Monitor Bently Nevada 3300/16-14-01-03-00-00-00

Bently Nevada 3300/16-14-01-03-00-00-00 Dual Vibration Monitor Module

The Bently Nevada 3300/16-14-01-03-00-00-00 provides advanced dual-channel vibration monitoring for industrial machinery. This module delivers precise vibration measurement and protection capabilities.

Core Technical Specifications

• Manufacturer: Bently Nevada
• Part Number: 3300/16-14-01-03-00-00-00
• Module Type: Dual Vibration Monitor
• Channels: 2 independent monitoring channels
• Output Signals: 4-20mA proportional output per channel
• Measurement Accuracy: ±0.5% of full scale
• Frequency Range: 0.5 Hz to 10 kHz (±3 dB)
• Sampling Rate: 25.6 kHz per channel
• Response Time: <100 ms for alarm outputs
• Operating Temperature: -20°C to +70°C (-4°F to +158°F)

Vibration Measurement Specifications

• Velocity Range: 0-25.4 mm/s (0-1.0 in/s) full scale
• Acceleration Range: 0-20 g full scale
• Displacement Range: 0-254 μm (0-10 mils) peak-to-peak
• Resolution: 0.1 μm (0.004 mils) displacement
• Dynamic Range: >80 dB signal-to-noise ratio

Alarm & Protection Settings

• Programmable Alarms: 2 per channel (Alert/Danger)
• Alarm Settings: Independently configurable per channel
• Time Delays: 0.1 to 30 seconds programmable
• Latching/Alarms: Configurable latching or non-latching
• Relay Outputs: 2 Form C relays per channel (250VAC/30VDC, 5A)

Input & Sensor Specifications

• Sensor Type: Compatible with Bently Nevada proximitors
• Input Impedance: 100 kΩ minimum
• Excitation Voltage: -24 VDC for proximitors
• Current Draw: 4 mA per sensor typical
• Cable Length: Up to 300 meters (1000 feet) recommended

Electrical Specifications

• Power Supply: 18-30 VDC, 24 VDC nominal
• Power Consumption: 3.5 W typical, 5 W maximum
• Isolation: 500 Vrms channel-to-channel, 1500 Vrms channel-to-ground
• Common Mode Rejection: >120 dB at 50/60 Hz
• Ground Loop Rejection: >100 dB at 50/60 Hz

Communication & Interface

• Serial Interface: RS-485 Modbus RTU
• Baud Rates: 1200, 2400, 4800, 9600, 19200, 38400 bps
• Address Range: 1-247 Modbus addresses
• Update Rate: 10 Hz for all monitored parameters
• Diagnostics: Continuous self-diagnostic monitoring

Physical Specifications

• Dimensions: 120 mm × 100 mm × 45 mm (4.72" × 3.94" × 1.77")
• Weight: 0.45 kg (0.99 lbs)
• Mounting: DIN rail TS35/7.5 or panel mounting
• Connectors: Removable screw terminals, 2.5 mm² capacity
• Enclosure Rating: IP20 (requires protective enclosure)

Packaging & Shipping

• Package Contents: 1 x 3300/16-14-01-03-00-00-00 monitor module
• Documentation: Installation manual, calibration certificate
• Shipping Methods: FedEx UPS DHL available
• Calibration: Factory calibrated, NIST traceable

FAQ - Frequently Asked Questions

What is the primary application of this vibration monitor?

The 3300/16-14-01-03-00-00-00 provides continuous vibration monitoring for rotating machinery such as pumps, compressors, fans, and turbines with dual-channel capability.

What vibration parameters can it measure?

This module measures displacement (μm/mils), velocity (mm/s/in/s), and acceleration (g) with ±0.5% accuracy across a 0.5 Hz to 10 kHz frequency range.

How are the alarm outputs configured?

Each channel provides two programmable alarm levels (Alert/Danger) with configurable time delays from 0.1 to 30 seconds and latching or non-latching options.

What communication interface is available?

The module features RS-485 Modbus RTU interface supporting multiple baud rates from 1200 to 38400 bps for integration with control systems.

What power supply is required?

It operates on 18-30 VDC with typical consumption of 3.5W. The module provides -24VDC excitation for compatible Bently Nevada proximity sensors.

© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | Phone: +86 153 9242 9628

Partner: AutoNex Controls Limited