Allen-Bradley 1790D-0W6 6-Relay Output Module
Pesanan Borong & Penghantaran Pantas
Diskaun Segera 10% Untuk Kad Kredit/Debit Winter Banks EMI dan Kad Kredit
Penghantaran Pantas & Boleh Dipercayai ke Seluruh Dunia – Sedia untuk Dihantar dari Stok
- Penghantaran pantas
- Polisi Pemulangan
- Harga Terendah
- Pusat Bantuan 24/7
-
Penjual:
Allen-Bradley
-
Jenis:
Output Module
- Tags Output module
Mengenai Produk
Allen-Bradley 1790D-0W6 6-Relay Output Module Product Introduction
Key Technical Specifications
- The 1790D-0W6 features six Form A (normally open) relays with single pole, single throw configuration.
- Each relay can switch 2.0A at 5-28.8V DC or 2.0A at 30V AC with resistive loads.
- The module has a low on-state voltage drop of 0.5V maximum at 2.0A, 24V DC.
- Initial contact resistance is only 30 mΩ for efficient power transmission.
- Relay switching delay times are 10 ms maximum for both off-to-on and on-to-off transitions.
Power Requirements & Wiring
- The module operates with a DeviceNet power supply rated at 24V DC nominal (11-28.8V DC range).
- Field power supply requires 19.2-28.8V DC for proper relay operation.
- Each channel has independent common terminals (1 point/1 COM) for wiring flexibility.
- All connections utilize a standard 37-pin D-shell connector for secure installation.
- The module has a maximum power dissipation of 1.2W from DeviceNet power.
Relay Performance & Durability
- The relays offer photocoupler isolation with 1250V AC RMS rating between I/O and logic circuits.
- Expected contact life is 300,000 cycles for resistive loads and 100,000 cycles for inductive loads.
- Each channel features green LED status indicators for immediate visual feedback.
- Minimum load requirement is 100 µA at 100 mV DC per input channel.
- Off-state leakage current is limited to 1.5 mA maximum for energy efficiency.
Frequently Asked Questions (FAQ)
-
Q: What type of relays does the 1790D-0W6 module use?
A: The module uses six Form A (normally open) SPST relays with independent contacts. -
Q: What voltage and current can these relays switch?
A: Each relay can switch up to 2.0A at 5-28.8V DC or 30V AC with resistive loads. -
Q: What is the expected lifespan of the relays?
A: The relays are rated for 300,000 cycles with resistive loads and 100,000 cycles with inductive loads. -
Q: Does this module support both AC and DC loads?
A: Yes, the 1790D-0W6 can switch both DC (5-28.8V) and AC (30V) loads up to 2.0A. -
Q: What is your shipping and return policy?
A: We ship within 5 days via major carriers and offer a 30-day return policy for customer satisfaction.
© 2026 NexAuto Technology Limited. All rights reserved.
Original Source: https://www.nex-auto.com/
Contact: sales@nex-auto.com | Phone: +86 153 9242 9628
Kutipan & Maklumat Pantas
- Sebutharga Pantas: Terima harga dan ketersediaan dengan cepat daripada pasukan khidmat pelanggan kami yang berdedikasi.
- Penghantaran: Penghantaran dipercepat, kargo, dan antarabangsa tersedia di seluruh dunia.
- Jaminan: NexAuto menawarkan jaminan 12 bulan untuk semua alat ganti yang dibeli daripada kami, selain daripada perlindungan pengeluar.
- Pemulangan: Polisi pemulangan 30 hari untuk alat ganti yang rosak atau tidak sepadan, memastikan ketenangan fikiran.
- Pembayaran: Pilihan fleksibel termasuk kad kredit utama, PayPal, dan pemindahan bank.
- Kalibrasi Tersuai: Berikan spesifikasi anda, dan kami akan menguruskan selebihnya dengan ketepatan.

Penyelesaian Elektrik Industri
Peralatan Automasi Menyeluruh untuk Setiap Kemudahan
PLCs, HMI, Pemacu Servo, Sensor, dan Kabel untuk operasi yang boleh dipercayai.
BENTLEY NEVADA
Penyelesaian Pemantauan Keadaan
Probe jarak dekat, sensor, dan sistem pemantauan untuk melindungi mesin kritikal.
ALLEN-BRADLEY
Komponen Automasi Industri
PLC, HMI, dan modul I/O berkualiti tinggi untuk sistem kawalan yang boleh dipercayai.
HONEYWELL
Pengawal, Modul I/O & Antara Muka
Bahagian baru untuk menyokong platform DCS dan pemasangan PLC.
Catatan blog
-
Tingkatkan Barisan Pengeluaran Dengan AB PLC | Data Prestasi & Pulangan Pelaburan
Kenaikan taraf AB PLC mengurangkan masa henti sebanyak 45%, pulangan dalam 8-14 bulan. Metrik sebenar... -
Sistem Pemacu & Kawalan ABB Untuk Persekitaran Industri Yang Keras
Pemacu ABB memastikan operasi stabil dalam suhu melampau, habuk, dan getaran. Data sebenar dari 12,000...
-
Sistem Kawalan AB Meningkatkan Kecekapan Kilang Sebanyak 30%
Data 2025 Menunjukkan Peningkatan 30%. Penalaan PID, Pembetulan Latensi & Penyelenggaraan Ramalan Memberikan Keputusan Kecekapan...

















