Schneider Electric 140DIO33000C | Intrinsically Safe Output

Core Product Overview

• The Schneider Electric 140DIO33000C is an intrinsically safe output module.
• This module provides safe output control in explosive hazardous areas.
• It is certified for Zone 20, 21, and 22 applications with dust and gas hazards.

Key Technical Specifications

• Manufacturer & Model: Schneider Electric 140DIO33000C
• Safety Zone: Zone 20, 21, 22 hazardous locations
• Output Type: Open Collector 24V DC
• Current Rating: 360 mA module total, 45 mA per point
• Output Voltage: 24 V DC operation
• Response Time: 1 ms switching time
• Certification: ATEX, FM, SIRA, GOST, C-tick

Safety & Hazardous Area Features

• ATEX Zone: 20, 21, 22 for dust and gas environments
• Intrinsic Safety: II1 G/D-EEx ia IIC marking
• FM Approval: Class 1 Division 2 (hazardous locations)
• Protection: Internal fuse and transient voltage suppression
• Isolation: 2500 V DC between channels and bus
• Hot Swapping: Not allowed per IS standards

Electrical Specifications

• Output Configuration: Open collector sinking outputs
• Total Current: 360 mA maximum per module
• Point Current: 45 mA maximum per output point
• Leakage Current: 0.4 mA per point off state
• Bus Current: 2.2 A backplane requirement
• Power Dissipation: 5 W maximum

Environmental & Physical Specifications

• Operating Temperature: 0°C to 60°C (32°F to 140°F)
• Storage Temperature: -40°C to 85°C (-40°F to 185°F)
• Humidity: 95% non-condensing operation
• Altitude: ≤ 5000 m (16404 ft) operating altitude
• ESD Protection: 4 kV contact, 8 kV air discharge
• EMF Immunity: 10 V/m (80-2000 MHz)

Ordering & Compliance Details

• Product Line: Modicon Quantum Automation Platform
• Part Number: 140DIO33000C
• Safety Standard: ATEX 94/9/EC, EN 50020, EN 50014
• Certifications: SIRA 02ATEX2345X, FM, C-tick, GOST
• Software: Concept V2.2+, ProWORX, Unity Pro compatible
• Origin: Manufactured in United States

Installation Requirements

• Install in safe area with IS barriers to hazardous area
• Follow ATEX and FM installation guidelines precisely
• Connect through certified intrinsic safety barriers
• Do not attempt hot swapping - power down first
• Ensure proper grounding and isolation
• Verify all hazardous area certifications are valid

Packaging & Delivery

• One Schneider Electric 140DIO33000C IS output module
• Complete hazardous area certification documentation
• Shipping via FedEx, UPS, or DHL express service
• Original factory packaging with protective coating

Frequently Asked Questions

What hazardous zones is this module approved for?

The 140DIO33000C is approved for Zone 20, 21, and 22 hazardous locations.

What is the output current capacity?

360 mA total module current, with 45 mA maximum per output point.

What safety certifications does it have?

ATEX, FM Class 1 Div 2, SIRA, GOST, C-tick, and CE certifications.

Can this module be hot-swapped?

No, hot swapping is not allowed per intrinsic safety standards.

What is the operating altitude limit?

It operates at altitudes up to 5000 meters (16404 feet).